NAS Codex › Synology › Synology STATUS or ALERT LED orange (blinking or static): what it means
Synology STATUS or ALERT LED orange (blinking or static): what it means
The STATUS light (or, on models that have one, the ALERT light) on a Synology NAS is blinking orange or staying orange. What that means depends on your DSM version and on whether DSM has finished starting. Synology's tables below cover both, and the next step is the same in every case: check the device status in Synology Assistant.
Written against: Synology Knowledge Center articles for models released in 2015 or later, with LED tables for DSM 6.2.3 and below and DSM 6.2.4 and above (tagged DSM 7 series and legacy versions). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
DSM 6.2.3 and below: blinking orange covers everything from "no drive installed" to a crashed volume, so check Synology Assistant. DSM 6.2.4 and above: static orange STATUS (or an ALERT light blinking orange or red) with DSM ready means a degraded or crashed volume, and Synology's boot-LED article adds fan failure and overheating. Sign in to DSM for details, or open Synology Assistant if you cannot.
Synology's tables
Models without an ALERT LED
| DSM 6.2.3 and below | DSM 6.2.4 and above | System mode | Probable cause |
|---|---|---|---|
| STATUS: Blinking orange | STATUS: Blinking green | DSM not ready | No drive installed; DSM not installed; "Configuration Lost" status |
| STATUS: Blinking orange | STATUS: Off | DSM ready | No volume created |
| STATUS: Blinking orange | STATUS: Static orange | DSM ready | Degraded volume detected; crashed volume detected |
Models with an ALERT LED
| DSM 6.2.3 and below | DSM 6.2.4 and above | System mode | Probable cause |
|---|---|---|---|
| STATUS: Blinking orange, ALERT: Off | STATUS: Blinking green, ALERT: Off | DSM not ready | No drive installed; DSM not installed; "Configuration Lost" status |
| STATUS: Blinking orange, ALERT: Off | STATUS: Static green, ALERT: Off | DSM ready | No volume created |
| STATUS: Blinking orange, ALERT: Off | STATUS: Static green, ALERT: Blinking orange or red | DSM ready | Degraded volume detected; crashed volume detected |
So on DSM 6.2.3 and below, blinking orange on its own does not tell you which cause it is. On DSM 6.2.4 and above, orange after start-up points to the volume.
Synology's boot-LED overview (models from 2015, DSM 6.2.4 and later) adds: if the STATUS or ALERT LED stays static orange or keeps blinking orange when DSM is ready, it indicates a system error "such as fan failure, system overheating, or volume degrade/crashed", and you should sign in to DSM for more information.
Check the status in Synology Assistant
- Download Synology Assistant from Synology's Download Center (select your model, then the Desktop Utilities tab) and install it.
- Launch it and find your NAS. If it cannot find the NAS, see NAS not found on the local network first.
- Act on the status it shows:
- DSM not installed: Synology says do not continue installing DSM, or all data on the drives will be deleted. Retrieve the data from the drives before anything else.
- Configuration Lost: there may be a failed system partition or drive, or a Mode 2 reset was triggered. See Configuration lost.
- Migratable/Recoverable: follow the Synology Assistant wizard to reinstall DSM. Synology says no system configurations or shared-folder data will be deleted.
- Ready but the light is still orange: the volume or storage pool has a problem. No volume created: create one in Storage Manager. Storage pool degraded: see storage pool degraded. Storage pool crashed: see volume crashed.
The LED's position on the case differs by model; Synology points to each model's Product Manual for its location.
When to stop and get help
Stop if Synology Assistant shows Not installed on a NAS that held data: installing DSM would delete it. Also stop if DSM reports a crashed volume or pool, or if a fan or overheating error persists. Synology's beeping article says a fan that still fails after dusting and a temperature check may be broken, and points to its warranty process.
Questions
What does a static orange STATUS light mean on a Synology?
On DSM 6.2.4 and above with DSM ready, Synology's table lists a degraded or crashed volume. Its boot-LED overview adds fan failure and system overheating. Sign in to DSM to see which.
Why does my Synology blink orange right after a reset?
Synology's reset article says that after a Mode 2 reset the STATUS light blinks orange or green, depending on DSM version and whether the model has an ALERT LED, and Synology Assistant shows Configuration lost.
Is it safe to install DSM when Synology Assistant says Not installed?
Not if the drives hold data. Synology says not to continue installing DSM, or all data on the drives will be deleted; retrieve the data first.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-14.
- Synology Knowledge Center: The STATUS or ALERT LED indicator keeps blinking or lights up steadily in orange. What can I do?
- Synology Knowledge Center: How to differentiate system modes of your Synology NAS by LED indicator statuses
- Synology Knowledge Center: What do the device statuses in Synology Assistant and Web Assistant mean?
- Synology Knowledge Center: How do I reset my Synology NAS? (For DSM 6.2.4 or above)
- Synology Knowledge Center: My Synology NAS keeps beeping. What can I do?