NAS Codex › Synology › Synology Surveillance Station camera disconnected or not found
Synology Surveillance Station camera disconnected or not found
Synology has three Surveillance Station articles for camera connection problems: a camera that keeps losing connection, a camera whose Test Connection fails when you add it, and a camera that does not appear in the auto-search list. This page follows them in that order.
Written against: Surveillance Station on DSM (Synology KB: What can I do if my camera loses connection?; What can I do if the camera connection test failed?; What can I do if I can't find my camera in Surveillance Station?). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Give the camera a static IP and a wired connection, then ping it from a computer on the same network. Check that its RTSP stream plays in VLC; if it doesn't, Synology says the camera may be malfunctioning. If Test Connection fails, recheck the camera's username and password, its IP address, the model you selected, and its ONVIF settings.
Camera keeps losing connection
Synology's article is for an IP camera that has recently become disconnected or unstable in Surveillance Station. It says to work through every step if the first does not fix it.
1. Check the live stream
Install VLC Media Player on your computer and check whether you can stream and play the camera's video stably over RTSP.
- If the stream won't play, Synology says the camera might be malfunctioning; contact the manufacturer.
- If it streams but playback is unstable, try lowering the video quality.
Synology notes that each camera may use a different URL format for RTSP streaming; the manufacturer can confirm yours.
2. Strengthen the network connection
Synology says Surveillance Station may lose a camera when the network connection is poor, or after changes to bandwidth, firewall or IP address settings. Its adjustments:
- Assign the camera a static IP address, so its IP doesn't renew and cause a disconnection.
- Use a wired connection, which Synology says streams much more stably than wireless.
- For wireless-only cameras, remove obstacles such as walls or furniture between the camera and the wireless signal source, and keep them as close together as possible.
To test connectivity when your computer and the Synology server are on the same network, open Command Prompt (Windows) or Terminal (macOS) and run ping followed by the camera's IP address. A successful ping lists how long the camera took to respond. If the output shows the request timed out, packets lost or the destination unreachable, troubleshoot according to those messages.
3. Restart the camera
Restart the camera and see whether the connection comes back. Synology says some cameras need regular restarts to stay stable because of hardware limitations. You can schedule them in IP Camera > Edit > Optimization > Advanced > Force Restart, or in the camera's own web interface.
4. Check recent camera firmware
Synology says some camera firmware updates can affect connectivity. Reset the camera to see whether the connection is restored, or contact the manufacturer. If the problem continues after all of these steps, contact Synology Technical Support with the symptoms and your troubleshooting results.
Test Connection fails when adding the camera
The Test Connection button on the IP camera Information page confirms whether the camera connection and HTTP service are normal. When it fails, no green checkmark appears. Synology's checks:
- Username and password: make sure they are entered correctly. Synology says some cameras require a password change before any further setup; sign in to the camera's web UI and check.
- Network: each camera needs a unique IP address. Find the correct one in the camera's web UI or your router's connected-devices page. For remote viewing, check the port forwarding rules on both the camera and the router.
- Camera model: make sure the correct model is selected in Surveillance Station; check the camera's manual or the manufacturer.
- ONVIF: if you add the camera via ONVIF, enable ONVIF on the camera and make sure the ONVIF port, account and password in Surveillance Station match the camera's settings.
- 2N IP Vario intercoms: Synology says they need Enhanced Video and Enhanced Integration licenses to run on Surveillance Station.
- D-Link cameras: because of hardware versions, the same D-Link camera can be recognized as different models, for example DCS-7517 and DCS-7517B. Find the hardware version using D-Link's instructions and select the matching model.
Camera isn't in the auto-search list
- Is it supported? Check the Synology IP camera Support List.
- Is it on a different network? Synology says auto-search only finds cameras in the same subnet. If the camera and server talk through routers, use the scan IP range function or enter the camera's details manually. You may need port forwarding rules for external access.
- Is UPnP on? Synology says to enable UPnP in the camera's web UI.
When to stop and get help
If the camera's RTSP stream won't play in VLC at all, Synology says the camera itself may be malfunctioning and to contact its manufacturer. Synology also notes that each camera and wireless device can have its own connectivity requirements.
Questions
Why does my camera keep disconnecting from Synology Surveillance Station?
Synology says a poor network connection, or changes to bandwidth, firewall or IP settings, can cause it. It recommends a static IP for the camera and a wired connection.
Why does Test Connection fail in Surveillance Station?
Synology's checks: the camera's username and password, a unique IP address, the correct camera model, and matching ONVIF port, account and password if you use ONVIF.
Why can't Surveillance Station find my camera?
Synology says auto-search only finds cameras in the same subnet. For a camera behind a router, use scan IP range or add it manually, and enable UPnP on the camera.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.