NAS Codex › Synology › Synology time sync not working: NTP status abnormal or clock wrong
Synology time sync not working: NTP status abnormal or clock wrong
DSM keeps its clock right by syncing with an NTP server, and a wrong clock can stop one-time-password sign-ins from working. Synology's Knowledge Center covers where the setting lives, what to try when the sync status shows abnormal, and what to do when a 2-factor code is rejected because the times do not match.
Written against: DSM 7 Time help and Synology Knowledge Center articles (last updated 2022-11-03 and 2022-11-08). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
In Control Panel > Regional Options > Time, choose Synchronize with NTP server, pick a server and click Update Now. If the status stays abnormal, Synology's order is: check the network, router and firewall; try another NTP server; try the server's IP address instead of its name (if that works, fix the DNS settings); and make sure port 123 is not blocked.
Setting the time to sync automatically
- Go to Control Panel > Regional Options > Time and check the time zone.
- Choose Synchronize with NTP server, then enter the IP address of a time server or choose one from the drop-down list.
- Click Update Now to make sure the NAS can sync with the server, then click Apply.
Synology says that to sync with an NTP server, a valid DNS server IP must be set in Control Panel > Network, and the NAS must be connected to the Internet.
Sync status is abnormal
Synology says to click Update Now first, and to click it every time you switch to a different NTP server. If the problem continues, try these in order:
- Make sure the network connections of both the NAS and the NTP server are working, and that router and firewall settings are correct.
- Choose another NTP server from the drop-down and click Update Now. If that works, Synology says the connection to the original server may be unstable.
- Enter the NTP server's IP address in the server field and click Update Now. If syncing by IP works but by name does not, check the NAS's DNS server settings.
- If syncing only works when you click Update Now and an error appears later, make sure port 123 is not blocked in your firewall and is forwarded correctly from the WAN IP of the NAS to its LAN IP. Synology adds that a timed-out NTP request can also mean port 123 is blocked.
- If the connection to the NTP server is refused, contact Synology Technical Support.
2-factor code rejected: "try synchronizing the system time"
When setting up or signing in with a one-time password, DSM can show: Code authentication failed. Please make sure the verification code you entered is correct or try synchronizing the system time of your mobile device and DSM. Synology's fix:
- On the phone, check the time setting. Synology recommends automatic time.
- On DSM, if you cannot sign in, reset 2-factor authentication first. Then set Synchronize with NTP server in Regional Options > Time and click Update Now.
When to stop and get help
Synology warns that if 2-factor authentication is enabled, changing the NTP settings might cause one-time passwords to stop working, so the administrator should disable their 2-factor settings before changing NTP settings. For Package Center errors, see Package Center connection failed.
Questions
Why is my Synology NTP sync status abnormal?
Synology suggests clicking Update Now, checking the network and firewall, trying another NTP server or the server's IP address, checking DNS, and making sure port 123 is not blocked.
What port does Synology NTP use?
Synology's troubleshooting article says to make sure port 123 is not blocked in the firewall, and that a timed-out NTP request may mean port 123 is blocked.
Why does my Synology 2-factor code fail with a time message?
Synology says the times on the phone and DSM may differ. Use automatic time on the phone and sync DSM with an NTP server, resetting 2-factor first if you cannot sign in.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.