NAS Codex › Synology › Synology Package Center "Connection failed", or a package won't install
Synology Package Center "Connection failed", or a package won't install
Package Center needs to reach Synology's servers to list, install and update packages, so most failures are network or clock problems. This page sets out Synology's steps for the "Connection failed" message, for repairing a package that has stopped working, and for installing a package manually when the online route does not work.
Written against: Synology Knowledge Center: Package Center articles for DSM 7 (connection article last updated 2026-04-20). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
For "Connection failed" in Package Center, Synology's checklist is: confirm the NAS is online, set the DNS servers manually (8.8.8.8 and 8.8.4.4) under Control Panel > Network > General, turn on Synchronize with NTP server under Control Panel > Regional Options > Time, and make sure a firewall or proxy is not blocking the sites Package Center uses.
"Connection failed" in Package Center
Synology says this means the connection between your NAS and Package Center is unstable or blocked. Its steps:
- Check the NAS is properly connected to the Internet, and that the settings in Control Panel > Network > Network Interface are correct.
- Go to Control Panel > Network > General, tick Manually configure DNS server, and set the preferred DNS server to 8.8.8.8 and the alternative to 8.8.4.4 (Synology gives 114.114.114.114 and 114.114.115.115 for China).
- If the NAS has joined a domain, make sure the domain's DNS server can resolve the addresses Package Center needs. For a domain created by Synology Directory Server, Synology says to enable the resolution service and forwarders in the DNS Server package.
- Go to Control Panel > Regional Options > Time, enable Synchronize with NTP server, pick a server and click Update Now so the clock is right.
- If your network uses a firewall or proxy server, make sure the websites Package Center uses are not blocked.
If it still fails, Synology says to contact its technical support.
A package shows Repair, or has stopped working
Synology says packages can need repair when they are too old to work with the latest DSM, or when their program files are missing or corrupted. They are listed under Installed. Click Repair, which installs the latest version of the package rather than fixing the old one, or use Manual Install to reinstall it from an .spk file. For other package problems, Synology's steps are to update the package, then remove it and its database (if it has one) and reinstall it, then contact the publisher or developer.
Installing a package manually
If you need a specific version, or the NAS has no Internet access, Synology says to download the .spk file from the Download Center (your model > Packages tab), then in Package Center click Manual Install, browse to the file, confirm the details and click Apply.
Third-party packages
- To add a third-party source, go to Package Center > Settings > Package Sources > Add and enter the repository URL from the developer's site. "Invalid location" means the address is not valid. Packages from the source appear under Community, and can take a while to load the first time.
- Synology says it does not provide technical support for individual third-party applications. Contact the publisher or developer listed under Other Information on the package's page.
When to stop and get help
Synology notes that built-in DSM packages cannot be uninstalled, and that Repair replaces a package with its latest version rather than fixing the installed one. If DSM updates fail with the same connection message, see DSM update not showing or download failed.
Questions
Why does Synology Package Center say Connection failed?
Synology says the connection between the NAS and Package Center is unstable or blocked. It suggests checking the network, setting DNS to 8.8.8.8 and 8.8.4.4, syncing time with an NTP server, and making sure a firewall or proxy is not blocking Package Center.
What does Repair mean in Synology Package Center?
Synology says a package needs repair when it is too old for the current DSM or its program files are missing or corrupted. Clicking Repair installs the latest version of the package.
How do I install a Synology package without Package Center?
Download the .spk file for your model from Synology's Download Center, then use Manual Install in Package Center to upload it.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.