NAS Codex › Synology › Synology Let's Encrypt certificate won't register or renew

Synology Let's Encrypt certificate won't register or renew

DSM can get a free certificate from Let's Encrypt and renew it automatically. Synology says Let's Encrypt certificates are valid for 90 days, and DSM renews them before they expire as long as the domain still passes validation. When registration or renewal fails, Synology's Knowledge Center points to a short list of causes, most of them in DNS or port forwarding.

Written against: DSM 7 Control Panel > Security > Certificate (Synology KB articles last updated Dec 27, 2021, Aug 26, 2022 and Apr 11, 2024). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

Check three things. Was the certificate created on this NAS, or imported from another device? Does every domain on the certificate point to this NAS's public IP address? For a custom domain, is port 80 on your router forwarded to port 80 on the NAS?

Why Synology says it fails

Synology lists these reasons a Let's Encrypt certificate cannot be registered or renewed:

Check the DNS records

Synology says the A record (IPv4) on your DNS server must point the device's fully qualified domain name (FQDN) to the right IP address, and the AAAA record for IPv6.

  1. Run nslookup with the NAS's FQDN to see which IP address the A record points to. For IPv6, use nslookup -type AAAA with the FQDN.
  2. Sign in to the NAS through SSH.
  3. Run curl checkip.synology.com (or curl checkipv6.synology.com) to get the device's public IP address.
  4. The two addresses must match. If they do not, Synology says to contact your DNS host or domain provider to correct the A or AAAA record.

If you gave any DSM service its own subdomain (Synology mentions Synology Chat as an example), check that record the same way.

Forward port 80 to the NAS (custom domains)

Synology says that to obtain or renew a certificate for a custom domain, port 80 must be forwarded to the NAS. A custom domain only supports HTTP-01 validation. Synology DDNS also supports DNS-01 validation, so this step does not apply to Synology DDNS.

First confirm port 80 on the NAS is open. Synology's port-check article gives a command for each system: on Windows, turn on Telnet Client and run telnet with the address and port (an open port shows only a cursor, a closed one says "Connect failed"); on macOS 11 Big Sur and later, run nc -zv with the address and port in Terminal; on Linux, run telnet. It lists possible reasons a port is closed: a wrong port forwarding rule, the external IP address set to a private IP, firewall rules, or the service not working.

Then test the forwarding from a web browser:

  1. On your local network, open http:// followed by the NAS's private IP address.
  2. On your local network, open http:// followed by the NAS's FQDN.
  3. From outside your local network, open http:// followed by the NAS's FQDN.

If all three show the same page, port 80 on your router is forwarded to port 80 on the NAS.

Let's Encrypt limits

Synology notes Let's Encrypt allows only a limited number of email accounts to register for certificates; if you exceed it, use an email address you registered before. There is also a limit on certificates per domain; if you hit it, Synology says to enter the current domain name as a Subject Alternative Name and use another domain name for the request. Only Synology DDNS supports wildcard certificates.

When to stop and get help

To add a fresh certificate, go to Control Panel > Security > Certificate > Add, choose Add a new certificate and then Get a certificate from Let's Encrypt. Enter the domain name and an email address; Synology says that address is where the expiry notice is sent.

Questions

Why won't my Synology Let's Encrypt certificate renew?

Synology lists an imported certificate, domain names that do not all point to the NAS's public IP, port 80 not forwarded for a custom domain, and Synology DDNS not activated or its hostname changed.

Does Synology renew Let's Encrypt certificates automatically?

Yes. Synology says Let's Encrypt certificates are valid for 90 days and DSM renews them automatically before they expire if the domain authenticates successfully.

Do I need port 80 open for Let's Encrypt on Synology?

For a custom domain, yes: Synology says port 80 must be forwarded to the NAS. This does not apply to Synology DDNS.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.