NAS Codex › Synology › Expanding a Synology storage pool: adding drives or replacing them with larger ones
Expanding a Synology storage pool: adding drives or replacing them with larger ones
Synology says a storage pool grows in one of two ways: add new drives, or replace existing drives with larger ones. Which works, and in what order, depends on the RAID type. This page sets out Synology's rules from its expansion guide (last updated 2026-09-17), its article on why capacity did not increase (2026-09-29), and the DSM 7 help for the Replace Drive feature.
Written against: Synology Knowledge Center articles for DSM 7 series, DSM legacy versions and DSM Enterprise (last updated 2026-09-17 and 2026-09-29) and DSM 7 help. Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
With an empty drive bay, install a drive and add it to the pool (JBOD, RAID 5, RAID 6, RAID TP, RAID F1, SHR-1 and SHR-2 support this). Without one, replace drives with larger ones one at a time in Storage Manager > Storage > the pool's menu > Replace Drive, always replacing the smallest drive first. For RAID 1, 5, 6, 10 and F1 with same-size drives, every drive must be replaced before capacity grows; for SHR, at least two.
Before you start
- Check the pool has not reached its maximum number of drives; if it has, Synology says to create a new pool or add a new RAID array to the RAID group.
- Use Synology's RAID Calculator to estimate the capacity after expansion.
- If the pool supports data scrubbing, Synology recommends running it first so the volume and pool are Healthy.
- Synology says expansion does not delete existing data, but strongly recommends backing up first. It also recommends drives on its compatibility list.
Option 1: add drives
If the NAS has empty drive bays, install drives and add them to the pool. Synology says this works for JBOD, RAID 5, RAID 6, RAID TP, RAID F1, SHR-1 and SHR-2. An SHR-1 pool with only one drive needs at least two more drives to gain capacity. Basic and RAID 1 pools can be expanded by adding drives and changing the RAID type to RAID 5.
Option 2: replace drives with larger ones
Synology says replacing drives works for RAID 1, RAID 5, RAID 6, RAID TP, RAID 10, RAID F1, SHR-1 and SHR-2. The order matters:
- RAID 1, 5, 6, 10 and F1: always replace the smallest drive first. If all drives are the same size, replace all of them.
- SHR: if all drives are the same size, replace at least two (four for SHR-2). If sizes differ, replace the smallest drives first, with drives at least as large as the largest drive in the pool. An SHR-1 pool with one drive cannot be expanded by replacing it.
Synology gives the capacity of each RAID type based on the smallest drive: RAID 1 = smallest drive; RAID 5 and RAID F1 = (drives − 1) × smallest; RAID 6 = (drives − 2) × smallest; RAID 10 = (drives ÷ 2) × smallest. So a RAID 5 pool of 4 TB, 3 TB and 2 TB drives has 4 TB available, and replacing the 4 TB or 3 TB drive changes nothing; the 2 TB drive must go first.
Using Replace Drive (with a spare bay or unused drive)
The Replace Drive button appears only if the NAS has at least one unused drive, the pool is SHR, SHR-2, RAID 1, 5, 6, 10 or F1 with at least two drives, and the new drive is the same type (SATA or SAS, HDD or SSD, 4K native or not). Only one drive can be replaced at a time, and the pool keeps its redundancy throughout.
- Go to Storage Manager > Storage, click the menu icon of the pool and select Replace Drive.
- Select the smallest drive to remove and click Next.
- Select the drive to add, click Next, and confirm that all data on the new drive will be erased.
- Click Apply. The pool shows Replacing, then returns to its normal status. Check the capacity on the Storage page; the old drive is deactivated and its LED shows which one to remove.
Replacing drives when there is no spare bay
- In Storage Manager > Storage, open the pool's Drive Info to find the smallest drive.
- On the HDD/SSD page, select it and click Action > Deactivate Drive.
- Power off the NAS (skip this if it supports hot-swapping), swap in the larger drive, and power on.
- Check the new drive appears under HDD/SSD. The pool will be Degraded: open its menu, select Repair, and choose the new drive.
- Repeat until all the drives you want are replaced.
Capacity did not increase after replacing drives
Synology says this happens when not enough drives were replaced or they were replaced in the wrong order. For example, a RAID 5 pool of three 4 TB drives needs all three replaced with 6 TB or larger drives; an SHR pool of 4 TB, 3 TB and 2 TB drives needs the 2 TB drive replaced first with one of at least 4 TB.
If expansion is not possible
If the RAID type does not support expansion or the bays are full, Synology suggests an expansion unit (on supported models), moving to a model with more bays, creating another storage pool, or backing up, replacing all drives with larger ones, reinstalling DSM, creating a new pool and restoring the backup.
When to stop and get help
Replace one drive at a time and let the pool finish repairing or replacing before the next. Adding or replacing a drive erases everything on the new drive. Synology strongly recommends a backup before you start. If a new drive does not show up, see drives not showing in Storage Manager; if the pool is degraded, see storage pool degraded.
Questions
How do I add more storage to my Synology NAS?
Synology says to add drives to empty bays and add them to the storage pool, or replace existing drives with larger ones one at a time. Adding drives works for JBOD, RAID 5, RAID 6, RAID TP, RAID F1 and SHR.
Why didn't my Synology capacity increase after replacing a drive?
Synology says not enough drives were replaced or they were replaced in the wrong order. For RAID 5 with same-size drives, all must be replaced; for SHR, at least two; and with mixed sizes, the smallest drive must be replaced first.
Which drive should I replace first on a Synology NAS?
Synology says to replace the smallest drive first. For SHR with mixed sizes, the replacement must be at least as large as the largest drive in the pool.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.