NAS Codex › Synology › Synology installed drives not showing in Storage Manager: what to check

Synology installed drives not showing in Storage Manager: what to check

You installed drives the way your Synology manual says, but they are missing from Storage Manager > HDD/SSD (on DSM Enterprise, Drives). Synology's own article walks through four checks that separate a drive problem from a drive-slot problem. This page gives those checks in Synology's order, plus what Storage Manager and Synology Assistant mean when they do show something.

Written against: Synology Knowledge Center articles tagged DSM 7 series, DSM legacy versions and DSM Enterprise, and DSM 7 help (HDD/SSD). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

Check that the drives are on the Synology Products Compatibility List. Then, in Synology's order: try the drives in empty slots; if there are none, test the drives on a computer; if you have no computer, shut down, take out all drives, put the missing ones in different slots, restart and look at Synology Assistant. "Not installed" points at the drives; "Ready" points at the original slots, and Synology says to contact your local reseller for a repair or replacement.

First: is the drive missing, or listed with a status?

Storage Manager's HDD/SSD page shows the information and status of installed drives. Select a drive and expand it to see its location, drive status, allocation role, temperature and firmware version. If the drive is listed but flagged, DSM 7 help explains the status:

If the drive is not listed at all, use the checks below.

Synology's checks, in order

  1. Check the compatibility list. Make sure the drives are on the Synology Products Compatibility List for your model. Synology says drives that are not on it might not function properly, and DSM 7 help adds that drives not on the list may affect system stability and result in data loss.
  2. Try empty slots. If your NAS has empty drive slots, insert the missing drives into them and check whether they appear in Storage Manager.
  3. No empty slots: try a computer. Connect the drives to a computer to see if they work.
  4. No empty slots and no computer: swap slots and use Synology Assistant. Shut down the NAS and take out all the installed drives. Insert the drives that were missing from Storage Manager into different slots, restart, and open Synology Assistant to read the status:
    • Not installed: the drives still cannot be found in the other slots. Synology says the drives themselves may be faulty; try a different drive.
    • Ready: the drives were identified in the different slots, so the problem likely lies with the previous slots. Synology says to contact your local reseller for a repair or replacement.

Before you swap slots: Synology's notes say that on models that do not support hot swapping you must shut down the system before switching drive slots; the datasheet for your model says whether it supports hot swapping. On rack-mount models, Synology says to make sure the screws holding the drive in its tray are tightened.

What "Not installed" means in Synology Assistant

Synology's article on Synology Assistant and Web Assistant statuses lists several causes for Not installed. Two match this problem: drives that were in use for some time while the device suddenly shows Not installed, which means the device cannot recognize the drives; and no drive detected, where Synology says to make sure healthy drives are properly inserted. In both cases it also points to checking the drives' health on a computer. Ready means DSM is installed and ready to use.

A compatible drive that still is not recognized

DSM keeps a drive database with drive temperature and S.M.A.R.T. attribute information, the compatibility list and firmware updates for Synology drives. It updates automatically and when a new drive is inserted. DSM 7 help says to update it by hand when, among other cases, the system cannot recognize a drive that is already on the compatibility list:

  1. Go to Storage Manager > HDD/SSD > Settings > Advanced.
  2. In the Drive Database section, click Update Now.
  3. If the NAS cannot reach Synology's server, download the Synology HDD/SSD Offline Update Pack from Synology's Download Center (choose the product category and model, open the Operating System tab, then Update Modules), and use Manual Update in the same Drive Database section.

Synology says updating the database keeps the compatibility information current and does not affect drive performance.

When to stop and get help

Stop if the missing drives held a storage pool with data you need: do not create or repair anything on the NAS until the drives are found, and copy off what is still reachable first. If Synology Assistant shows Ready only when the drives sit in other slots, Synology points you to your local reseller for a repair or replacement.

Questions

Why do my drives not appear in Synology Storage Manager?

Synology's article checks the compatibility list first, then whether the drives appear in other slots or work on a computer. If they show as Not installed in Synology Assistant from other slots, the drives may be faulty. If they show as Ready from other slots, the original slots are the likely problem.

Do I need to shut down the NAS before moving drives to other slots?

On models that do not support hot swapping, yes. Synology says to shut down before switching drive slots and to check your model's datasheet to see whether hot swapping is supported.

What does Unrecognized mean on the HDD/SSD page?

DSM 7 help says the system cannot recognize or use the drive, and recommends replacing it immediately with a compatible drive. If the drive is already on the compatibility list, help also says to update the drive database manually.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-14.