NAS Codex › Synology › Synology NAS email notifications not working: how Synology says to set them up
Synology NAS email notifications not working: how Synology says to set them up
DSM sends notification emails only once both a sender and a recipient profile are set up. This page goes through Synology's DSM 7 help for email notifications, its Gmail guide (which covers the App Password Google now requires), and push notifications as an alternative.
Written against: Synology DSM 7 help (Email, Push Service) and Synology Knowledge Center article for DSM 7 series and DSM legacy versions (last updated 2023-08-07). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Go to Control Panel > Notification > Email. Set up a sender (Gmail or Outlook via Sign In, or a custom SMTP server), add a recipient profile with a rule and your address, and click Send Test Email. For Gmail as a custom SMTP server, Synology says to use smtp.gmail.com, port 587, SSL/TLS, and a 16-character Google App Password.
How DSM email notifications work
Synology's DSM 7 help says you must set up a sender first, then one or more recipient profiles. Each profile has a rule for which events it gets, and can hold several email addresses. Alternatively, you can tick Receive notifications directly in your Synology Account when system status changes or errors occur, sign in, and choose a rule; notifications then go to your Synology Account email.
Step 1: set up the sender
- Email provider: click Set Up and choose Gmail or Outlook (click Sign In and follow the steps) or QQ (enter username and password).
- Custom SMTP server: choose Custom SMTP server and enter the server name or IP address and port. Tick Authentication required and enter the username and password if the server needs it, and Secure connection (SSL/TLS) required if it uses SSL/TLS. Enter a sender email, then click Save.
Synology notes two common catches: if the SMTP server is a domain name, a valid DNS server must be set in Control Panel > Network > General and the server must be on the internet; and if you set a different SMTP port in your port forwarding rules, enter that port.
Step 2: add a recipient and test
- Under Recipient Profiles, click Add.
- Choose a rule, or click Create to make one.
- Enter the addresses (separated by spaces, semicolons, commas or Enter) and click Add.
- Select the profile and click Send Test Email.
Using Gmail
Synology's Gmail guide gives two methods:
- Method 1 (recommended): on DSM 6.2.4 or later, set the service provider to Gmail, click Sign In, choose your Google account, allow Synology DSM Notification to send on your behalf, click Apply, then send a test email.
- Method 2 (custom SMTP): first turn on 2-Step Verification and App Passwords in your Google account. Then use SMTP server smtp.gmail.com, port 587, authentication on, your Gmail address as username, your 16-character App Password as the password, and SSL/TLS on. Use your Gmail address as the sender email; Synology says a sender that differs from the username may get your emails marked as spam.
Synology explains that since 30 May 2022, Google no longer supports third-party apps that sign in with only a username and password, which is why 2-Step Verification and an App Password are needed. Its DSM 7 help adds that Method 2 is also required for sending email from Task Scheduler scripts or from PHP on Web Station sites.
Alternative: push notifications
In Control Panel > Notification > Push Service, you can pair a phone (scan the QR code to install DS finder, sign in, and turn on push notifications) or a browser (install the Synology Browser Notification extension in Chrome, Edge or Safari; Firefox is not supported). Choose a rule and click Send Test Message.
When to stop and get help
If the test email fails, check the DNS server setting and the SMTP port, two catches Synology names. For Gmail, an ordinary password will not work as an SMTP password: Synology says to use an App Password with 2-Step Verification. If QuickConnect is also failing, see QuickConnect not working.
Questions
Why is my Synology NAS not sending email notifications?
Synology says you need both a sender and a recipient profile in Control Panel > Notification > Email. For a custom SMTP server with a domain name, a valid DNS server must be set in Control Panel > Network > General. Use Send Test Email to check.
What are the Gmail SMTP settings for a Synology NAS?
Synology says to use smtp.gmail.com, port 587, authentication with your Gmail address, your 16-character Google App Password, and SSL/TLS. It recommends signing in with the Gmail service provider option instead where possible.
Why does my Gmail password not work on my Synology NAS?
Synology says Google stopped supporting third-party sign-in with only a username and password on 30 May 2022. Turn on 2-Step Verification and use an App Password.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.