NAS Codex › QNAP › QNAP Qsync not syncing: what each sync error means
QNAP Qsync not syncing: what each sync error means
When Qsync cannot sync a file it logs the reason in Qsync Client. QNAP's FAQs cover the most common errors: missing permissions, names that are too long or contain invalid characters, folders with too many files, and files over 500 GB. They also cover file types Qsync skips by default and folders that stop syncing after Windows is reset.
Written against: Qsync Client and Qsync Central on QTS (QNAP FAQs last modified 2023-03-31, 2024-01-11 and 2025-07-03). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Open the Sync Errors window (Qsync Client 5.0.9 and later) or File Update Center in Qsync Client to see why each file failed. The usual causes QNAP lists: your NAS account lacks read and write permission on the paired folder, the name is over 255 characters or contains / | \ : ? < > * ", the folder holds too many files, or the file is over 500 GB.
Step 1: read the error log
QNAP says that when Qsync cannot sync a file, it writes an error log in the File Update Center, or the Sync Errors window in Qsync Client 5.0.9 and later, with details of the problem.
The common sync errors
- Access denied: your NAS account needs both read and write permission on the paired folder. QNAP says that without it, no files are downloaded or uploaded even if the folder is paired. Ask a NAS administrator to grant read and write permission on the folder and its subfolders, then sync again.
- Name too long: Qsync cannot sync files or folders with names over 255 characters, counting dots and the extension. Rename them.
- Invalid characters: Qsync cannot sync names containing
/ | \ : ? < > * ". Rename the file or folder without them. - Too many files in one folder: to protect the NAS's CPU and memory, Qsync limits the files per folder (not counting subfolders), based on the NAS's available memory: 300,000 below 4 GB, 1,000,000 from 4 GB to under 16 GB, and 3,000,000 at 16 GB or more. Above that, Qsync skips the folder. Move files into subfolders or other folders.
- File larger than 500 GB: QNAP says Qsync syncs files up to 500 GB only.
Files Qsync skips on purpose
QNAP says Qsync excludes some file types by default, including .part files, which are usually temporary files from download managers. To check or change this, open Qsync Client, go to Settings > Sync Filters, and remove the extension from the exclusion list if you really want it synced, then click Apply. QNAP notes syncing temporary files like .part is generally not recommended.
Forcing a full resync
QNAP's steps to re-scan the local folder and restart synchronization:
- On the PC, open Qsync Client and click Pause Sync.
- On the NAS, open App Center and stop the Qsync Central service.
- Restart the NAS.
- On the PC, click Resume Sync.
- Right-click the Qsync icon in the system tray and select Sync Now to force a full scan.
"This folder does not support sync" after resetting Windows
QNAP says that if you reset Windows but kept your data, re-pairing the same local folder can fail with This folder does not support sync. The cause is that Qsync was not uninstalled normally, so the folder is still registered as a cloud folder by the old Windows installation. If the folder holds only a few files, create a new folder and add it to Qsync. If it holds many:
- Close Qsync Client.
- Rename the problem folder (for example,
testtotest01). - Create a new folder with the original name and move all the files into it.
- Open Qsync Client and pair the new folder.
- Delete the renamed folder once syncing is done.
When to stop and get help
Restarting the NAS for a full resync interrupts everyone using it, so pick a quiet time. If the error is Access denied, permissions have to be changed by a NAS administrator, not in Qsync. If you cannot reach the NAS at all from your computer, see QNAP NAS IP blocked or 403 Forbidden.
Questions
Why is Qsync not syncing some files?
QNAP lists missing read and write permission on the paired folder, names over 255 characters or with invalid characters, folders over the per-folder file limit, files over 500 GB, and file types excluded by default such as .part. The Sync Errors window shows which applies.
How many files can Qsync sync in one folder?
QNAP says it depends on the NAS's available memory: 300,000 files below 4 GB, 1,000,000 from 4 GB to under 16 GB, and 3,000,000 at 16 GB or more, not counting files in subfolders.
How do I fix "This folder does not support sync" in Qsync?
QNAP says this can happen after resetting Windows. Close Qsync, rename the folder, create a new folder with the original name, move the files into it, and pair the new folder.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.