NAS Codex › QNAP › QNAP NAS blocking your computer: IP blocked or 403 Forbidden
QNAP NAS blocking your computer: IP blocked or 403 Forbidden
QNAP NAS devices block a computer's IP address automatically after repeated failed logins, or when it is on a deny list or a QuFirewall deny rule. The blocked computer then cannot reach the web interface, SSH or file shares, and the browser may show 403 Forbidden. This page combines QNAP's three FAQs on finding and lifting the block.
Written against: QTS and QuTS hero, QuFirewall 2.4.1 and later (QNAP FAQs last modified 2025-09-24, 2025-12-11 and 2026-10-02). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Use a different device on the same network (or the same device on another network or VPN) and sign in to QTS as an administrator. Go to Control Panel > System > Security: remove your computer's IP from the deny list under Allow/Deny List, and from the blocked list under IP Access Protection. If QuFirewall is installed, delete the IP under your active profile's Denied IP Addresses.
How to tell it is an IP block
QNAP says IP Access Protection automatically blocks a source IP address after repeated incorrect logins or suspicious connection behaviour. The blocked computer cannot reach the NAS through the web interface, SSH or file sharing. QNAP lists three possible causes: IP access control blocking that computer, its IP being added to the NAS deny list, or firewall or network settings.
A 403 Forbidden page means the server understood the request but refused it. QNAP says this typically means the NAS is blocking your IP address or network, usually because the IP is on the deny list or temporarily blocked after repeated failed logins. Occasionally browser cache or cookies cause it, so first try another browser or a private window, and clear the original browser's cache and cookies if that works.
To confirm, try the NAS from another device on the same network. If that device connects, QNAP says the original computer's IP is likely blocked. Giving the computer a different IP address (set one manually or renew DHCP) and retrying can confirm it.
You need an unblocked device
QNAP points out that a blocked device cannot fix the block itself, because it cannot connect to change the settings. Use a different device on the same network whose IP is not blocked, or the same device on a different network or IP address (for example, another network or a VPN).
Unblock in QTS (no QuFirewall)
- Sign in to QTS as an administrator from the unblocked device.
- Go to Control Panel > System > Security > Allow/Deny List. If your computer's IP address or range is in the deny list, select it and click Remove, then Apply. The options are Allow all connections, Deny connections from the list or Allow connections from the list only.
- Go to Control Panel > System > Security > IP Access Protection and manage the blocked list there. QNAP says an IP blocked after multiple failed logins may be blocked only temporarily.
Unblock in QuFirewall
- On the unblocked device, install Qfinder Pro, open it, and double-click your NAS to open the QTS login page. Sign in.
- Open QuFirewall and go to Denied IP Analysis. Click Start IP Analysis, then try connecting from the blocked device by IP address while it runs.
- If the blocked device's IP appears in the results, create a QuFirewall rule to allow it.
- Also check your active profile under Firewall Profiles: next to Denied IP addresses, click the edit icon, select the IP if it is listed, and click Delete.
If no device can connect
QNAP suggests restarting the NAS as a last resort if no device can connect, then trying again from a different device. If the device stays blocked, it says to review the Access Logs in QuLog Center and report it to QNAP Customer Service. If nothing can reach the NAS at all, you may need to reset it.
Avoiding it next time
QNAP recommends adding administrator computers to the allow list, avoiding repeated failed logins, and reviewing deny lists and firewall rules periodically so admin devices are not blocked by mistake.
When to stop and get help
QNAP notes that changing firewall or security settings can affect the NAS's protection, so remove only the IP you recognise rather than switching protection off. A reset is a last resort for when no device can connect at all. If the NAS cannot be found on the network at all, see Qfinder Pro cannot find the NAS.
Questions
Why do I get 403 Forbidden on my QNAP NAS?
QNAP says it usually means the NAS is blocking your IP address, because it is on the deny list or was temporarily blocked after repeated failed logins. Occasionally browser cache or cookies cause it.
How do I unblock my IP on a QNAP NAS?
QNAP says to sign in from a different, unblocked device, then remove the IP from Control Panel > System > Security > Allow/Deny List and from IP Access Protection, or from QuFirewall's Denied IP addresses if it is installed.
Can I unblock my computer from the blocked computer itself?
No. QNAP says a blocked device cannot connect to change the settings. Use another device on the same network, or the same device on a different network or VPN.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.