NAS Codex › QNAP › QNAP firmware update stuck, interrupted or failed: what QNAP says to do

QNAP firmware update stuck, interrupted or failed: what QNAP says to do

A QTS or QuTS hero firmware update on your QNAP NAS stops making progress, was cut off by a power failure or network drop, or fails with "The digital signature has expired". QNAP has a FAQ for each. They share one fix: if the NAS boots, install the firmware manually. This page sets out each case and the manual update steps.

Written against: QTS and QuTS hero, all NAS series (QNAP FAQs last modified 2023-01-10, 2023-04-28 and 2025-07-10). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

If the update looks stuck, wait at least 15 minutes for any progress. If nothing changes, hold the power button for 5 seconds to force the NAS off, then power it on. If it boots, update the firmware manually: download the latest firmware for your model from the QNAP Download Center, then in Control Panel > Firmware Update > Manual Installation, browse to the ZIP file and click Update System. If it does not boot, follow QNAP's guide for a NAS that will not boot after a firmware update.

The update is stuck

QNAP's FAQ on stuck firmware updates says the update progress may stop and the NAS may become unresponsive, for reasons such as a network disconnection. Its steps:

  1. Confirm it is really stuck: wait at least 15 minutes and watch for any further progress or change.
  2. If it is stuck, force the NAS off by pressing and holding the power button for 5 seconds, then power it on again.
  3. Because the update was interrupted, QNAP says the NAS may or may not boot up. If it boots, a manual firmware update is needed to recover it (see below). If it does not boot, follow QNAP's guide for a NAS that will not boot after a firmware update.

Power failure or network drop during the update

QNAP's FAQ for an update interrupted by a power failure or network disconnection says the NAS may have been powered off or the update may have halted, and that the NAS may or may not fail to boot afterwards. If the NAS is still powered on, power it off manually and power it back on. Then:

"The digital signature has expired"

QNAP has a FAQ for this auto-update error: "Failed to install 5.X. The digital signature has expired." It says this happens when the firmware installed on the NAS is very old: the update server offers a package that was signed in the past and whose digital certificate has since expired, so the automatic update fails signature validation, even though newer firmware exists. QNAP's fix is a manual update to the latest firmware, after which it says the expired-signature problem is resolved.

How to update the firmware manually

QNAP gives these steps in its digital-signature FAQ:

  1. Go to the QNAP Download Center and download the latest firmware for your NAS model.
  2. Log in to the QTS web interface.
  3. Go to Control Panel > Firmware Update and select the Manual Installation tab.
  4. Click Browse and upload the firmware ZIP file you downloaded.
  5. Click Update System to start the update.
  6. Wait for the NAS to finish the update and restart automatically.

Summary of QNAP's steps

  1. Stuck: wait 15 minutes; if nothing changes, hold power 5 seconds and power on.
  2. Interrupted by power or network: power off and on.
  3. Boots: install the firmware manually from the Download Center ZIP.
  4. Does not boot: QNAP's guide for a NAS that won't boot after a firmware update.
  5. "Digital signature has expired": the firmware is very old; update manually to the latest.

When to stop and get help

Give a stuck update the full 15 minutes before forcing the NAS off: QNAP says to confirm it is stuck first, and that an interrupted update may leave the NAS unable to boot. If that happens, see QNAP won't boot after a firmware update.

Questions

What do I do if a QNAP firmware update is stuck?

QNAP says to wait at least 15 minutes to confirm it is stuck, then hold the power button for 5 seconds to force the NAS off and power it on. If it boots, update the firmware manually; if not, follow QNAP's guide for a NAS that won't boot after a firmware update.

What does 'The digital signature has expired' mean on a QNAP update?

QNAP says the installed firmware is very old and the update server offers a package whose signing certificate has expired, so the automatic update fails. Download the latest firmware and install it manually.

How do I manually update QNAP firmware?

QNAP says to download the latest firmware ZIP for your model from the Download Center, then go to Control Panel > Firmware Update > Manual Installation, click Browse, upload the file and click Update System. The NAS restarts when done.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.