NAS Codex › QNAP › QNAP "Storage pool is nearly full" / threshold reached warning

QNAP "Storage pool is nearly full" / threshold reached warning

QNAP shows "Storage pool is nearly full", sends "Storage pool 1 has reached the space alert threshold", or marks a pool or thin shared folder Warning (Threshold reached) when the pool's usage passes the threshold set for it. QNAP's FAQs explain why this can happen while the volume itself still shows free space, and what to change.

Written against: QTS and QuTS hero Storage & Snapshots (QNAP FAQs last modified 2021-10-18, 2022-06-24, 2022-08-17, 2022-08-26 and 2026-08-05). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

First decide whether the pool is really filling up or only allocated. If the warning appeared right after you created a thick volume, QNAP says the threshold is probably set lower than the volume you created: raise it in Storage & Snapshots > Storage/Snapshots > select the pool > Manage > Action > Set Threshold. If it appeared after months of use, free pool space by deleting old snapshots, shrinking or converting thick volumes, or deleting files from thin volumes and running space reclaim, or add disks.

What the warning measures

QNAP says "Storage pool is nearly full" means the usage of the storage pool has reached the threshold setting. The threshold belongs to the pool, not to a volume or shared folder.

QNAP explains that storage pool capacity used to create volumes or LUNs is counted as allocated, even if those volumes or LUNs still have free space inside them. If the capacity of the volume you created is larger than the pool threshold, the alert appears even though the volume itself has plenty of space.

1. Warning right after creating a volume

QNAP gives this case directly: you created a thick volume that uses the whole storage pool, and you have put few or no files on it yet. Its example is a threshold of 80% and a 3 TB thick volume on a 3 TB pool. The fix QNAP gives is a higher threshold, close to 100% usage. To change it:

  1. Sign in to QTS as an administrator.
  2. Open Control Panel, then Storage & Snapshots > Storage > Storage/Snapshots.
  3. Select the storage pool and click Manage.
  4. Click Action and select Set Threshold.

QNAP's other option is to shrink the volume so that the allocated capacity falls below the threshold.

2. Warning after using the NAS for a long time

When the warning comes after long use, QNAP lists ways to release pool space:

3. Thin shared folders on QuTS hero

QNAP's 2026 FAQ covers QuTS hero showing Warning (Threshold reached) on thin shared folders while the files themselves look well below the pool's physical capacity. QNAP says the warning can still be valid, and names three causes together:

QNAP's recommended fix:

  1. Open Storage & Snapshots and select the affected storage pool.
  2. Review the total pool capacity, used pool capacity, the provisioned capacity of thin shared folders or thin volumes, and the pool's snapshot settings.
  3. If Guaranteed Snapshot Space is enabled and you do not need it, disable or reduce it.
  4. Recheck pool usage after the change.
  5. If thin shared folders are heavily over-allocated, reduce the logical allocation or redesign the layout so the total provisioned size is closer to real pool capacity.

In QNAP's example, pool over-provisioning was set at about 10% (about 7.77 TB on a 77.6 TB pool) and could be lowered, for example to 5%. QNAP's first action in that case was to disable pool guaranteed snapshot space, because snapshots were not used.

What guaranteed snapshot space does

QNAP says snapshots are stored directly in the storage pool and are removed automatically when the system needs pool space for other purposes, such as thin provisioning. Enabling pool guaranteed snapshot space reserves a set amount of the pool so that a certain number of snapshots are kept. That reserved space counts against the pool.

Oversubscribed pools

QNAP defines subscription as the ratio between allocated space and available space in the pool. Its example: a thin volume with 10 TB allocated on a pool with 1 TB available shows 900% and "Oversubscribed" on the Overview page. QNAP says this does not affect storage until the thin volume's used space reaches the pool's actual available space; at that point the storage may go to read-delete or read-only status because the pool is full.

Check that it cleared

QNAP's verification steps: confirm the pool no longer shows excessive reserved snapshot space, confirm the used pool capacity drops after disabling or reducing guaranteed snapshot space, confirm the warning clears or the threshold is no longer reached, and compare total provisioned thin capacity with physical pool capacity.

When to stop and get help

QNAP warns: do not disable snapshot reservation or redesign the storage layout without confirming your backup and recovery plan. If the pool is already full and a volume has gone to read-delete or read-only, deal with that first.

Questions

Why does my QNAP say the storage pool is nearly full when the volume has free space?

QNAP says pool capacity used to create volumes or LUNs counts as allocated even if the volume has free space. If the volume is larger than the pool threshold, the alert appears.

How do I change the storage pool threshold on a QNAP NAS?

In Storage & Snapshots > Storage/Snapshots, select the pool, click Manage, then Action > Set Threshold. QNAP suggests a threshold close to 100% when a thick volume uses the whole pool.

What frees space in a QNAP storage pool?

QNAP lists deleting old snapshots, shrinking or converting thick volumes to thin, deleting files on thin volumes and running space reclaim, and adding disks.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.