NAS Codex › QNAP › QNAP volume status "Read/Delete": why the volume stopped taking writes and how QNAP says to fix it

QNAP volume status "Read/Delete": why the volume stopped taking writes and how QNAP says to fix it

In Storage & Snapshots a QNAP volume shows the status "Read/Delete". QNAP's FAQ says this means the data on the volume can only be read or deleted, and that it happens when the storage pool the volume belongs to is full. This page gives QNAP's explanation, the free-space numbers QTS uses, and the six actions QNAP lists for freeing pool space so the volume returns to normal read/write.

Written against: QTS, Storage & Snapshots (QNAP FAQs last modified 2022-06-24, 2022-08-17 and 2025-11-04). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

The fix is to free space in the storage pool, not just in the volume. QNAP says the volume goes back to normal read/write by itself once QTS sees more than 32 GB of free pool space. Go to Storage & Snapshots > Storage > Storage/Snapshots, click the pool that holds the volume and note whether its volumes are thin or thick. Then use one or more of QNAP's actions: permanently delete files and empty the Network Recycle Bins, run a space reclaim (thin volumes), delete old snapshots, reduce or disable the pool guaranteed snapshot space, expand the pool, or convert thick volumes to thin.

What "Read/Delete" means

QNAP says a volume with the Read/Delete status can only have its data read or deleted. You cannot modify existing data or write new data to it. Some operations also stop working. QNAP's example is that you cannot map a folder on the volume as a network drive.

Why it happens

QNAP says the status appears when the volume's parent storage pool is full, which it defines as the pool having less than 16 GB of unallocated space. It applies to a thin volume, or to a thick volume with snapshots. When QTS detects more than 32 GB of free pool space, the volume returns to normal read/write status.

QNAP's thin-or-thick FAQ explains why thin volumes are exposed to this. A thin volume takes space from the pool only as data is written, and all thin volumes in a pool share the pool's free space. QNAP says the administrator must make sure the pool has enough free space as more data is written. If the pool runs short, thin volumes enter read-delete or read-only mode until more pool space is available. A thick volume takes its full size from the pool when it is created, and that space is reserved for it alone.

Before you start

  1. Log in to QTS as an administrator.
  2. Go to Storage & Snapshots > Storage > Storage/Snapshots.
  3. Click the storage pool that contains the affected volume or volumes. All volumes in the pool and their information appear.
  4. Note which volumes are thin and which are thick. QNAP says two of the actions below need the pool to contain thin volumes or thick volumes.

QNAP's six ways to free pool space

QNAP says you can perform one or more of these.

1. Permanently delete unwanted files

  1. Open File Station, open a folder on the volume, select the unwanted files, right-click and select Delete.
  2. Select Delete permanently and click OK. Repeat for other folders and volumes.
  3. Then empty the recycle bins: Control Panel > Network & File Services > Network Recycle Bin > Empty All Network Recycle Bin, then OK.

2. Run a space reclaim (thin volumes)

The pool must contain at least one thin volume with reclaimable space. Deleting unwanted files from a thin volume creates reclaimable space. Select the pool, click Manage, then Action > Free some space. In the Increase Pool Free Space window, click Execute next to Run a space reclaim to release used space on thin volumes, then OK.

3. Delete unwanted snapshots

Select the pool, then a volume. Click Snapshot > Snapshot Manager, select the snapshots you no longer need and delete them. Repeat for other volumes.

4. Reduce or disable the pool guaranteed snapshot space

QNAP says you may need to delete some snapshots from each volume first. Select the pool, click Manage, then Action > Configure Pool Guaranteed Snapshot Space. Set a lower percentage of pool space to reserve for snapshots, or disable it, and click OK.

5. Expand the storage pool

This needs free disks in the NAS or in an expansion unit. Select the pool, click Manage, then Action > Expand Pool, and follow the Expand Storage Pool Wizard.

6. Convert thick volumes to thin volumes

QNAP says converting a thick volume to thin removes all existing snapshots of that thick volume, which frees space. Select the thick volume, click Manage, then Actions > Convert to Thin Volume, and click Apply. Repeat for other thick volumes if you want to.

If you saw "Storage pool is nearly full" first

QNAP's FAQ on that warning says it means pool usage has reached the threshold you set. If it appears right after you create a thick volume that uses the whole pool, QNAP says the threshold is probably set too low, and you can set it closer to 100%. If it appears after long use, QNAP lists the same kinds of fixes: delete old snapshots, shrink thick volumes that have plenty of free space or convert them to thin, delete old files on thin volumes and run space reclaim, and add disks to expand the pool if that is still not enough.

When to stop and get help

Two of QNAP's actions remove data for good. Its file step uses Delete permanently, which QNAP says permanently deletes the selected files, and QNAP says converting a thick volume to thin removes all existing snapshots of that volume. Make sure you have what you need before using either. If the volume shows Unmounted instead, see volume Unmounted after a failed conversion. For a RAID group that went read-only after disk problems, see RAID group degraded, read-only.

Questions

What does Read/Delete mean on a QNAP volume?

QNAP says the data on the volume can only be read or deleted. You cannot modify existing data or write new data, and some operations, such as mapping a folder on the volume as a network drive, do not work.

When does a QNAP volume go back to read/write?

QNAP says the status appears when the parent storage pool has less than 16 GB of unallocated space, and the volume returns to normal read/write status when QTS detects more than 32 GB of free pool space.

Will deleting files fix the Read/Delete status?

Deleting files permanently and emptying the Network Recycle Bins is one of QNAP's actions. On thin volumes, QNAP's space reclaim then releases that space back to the pool. QNAP also lists deleting snapshots, reducing the pool guaranteed snapshot space, expanding the pool and converting thick volumes to thin.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.