NAS Codex › QNAP › QNAP RAID scrubbing: why the NAS is slow and how long it takes

QNAP RAID scrubbing: why the NAS is slow and how long it takes

RAID scrubbing is a QNAP maintenance task that checks a RAID group for inconsistent data and tries to repair it. It runs for a long time on large pools, and while it runs the NAS can feel slower. QNAP's user guide and FAQs explain what it does, why it slows things down, and how to schedule it so it finishes without getting in the way.

Written against: QTS RAID scrubbing and QuTS hero pool scrubbing (QNAP user guide; tutorial last modified 2022-07-20; FAQ last modified 2025-11-10). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

Scrubbing is expected to reduce read and write speeds while it runs. If it gets in the way, schedule it for when the NAS is not in use: Storage & Snapshots > Global Settings > Storage tab, then set the RAID scrubbing (QTS) or Pool scrubbing (QuTS hero) schedule. QNAP recommends running it at least once a month.

What RAID scrubbing does

QNAP's user guide says QTS scans the sectors of a RAID 5 or RAID 6 group and automatically attempts to repair any errors it finds. The QNAP tutorial explains that it checks data consistency on RAID groups with parity (RAID 5 and RAID 6) and uses the redundancy to repair inconsistent data.

On the ZFS-based QuTS hero (and QES), QNAP also offers ZFS data scrubbing. Data is checked against its checksum when it is accessed and self-heals on a mismatch. Data that is not accessed has to be scrubbed manually or on a schedule to catch corruption.

Why the NAS is slow while it runs

QNAP warns that the read and write speeds of the RAID group may decrease while RAID scrubbing is in progress. Its QuTS hero FAQ says the same of pool scrubbing, and adds that on large storage pools, or pools holding a lot of data, scrubbing may take a long time to complete. While it runs, the RAID group status shows Scrubbing.

Run it manually (QTS)

  1. Go to Storage & Snapshots > Storage > Storage/Snapshots.
  2. Select a storage pool or static volume and click Manage.
  3. Select a RAID 5 or RAID 6 group. QNAP says its status must be Ready.
  4. Select Manage > RAID Scrubbing. The status changes to Scrubbing.

Schedule it so it does not get in the way

In QTS, click the Global Settings icon in Storage & Snapshots, enable RAID Scrubbing Schedule, choose Daily, Weekly or Monthly, set a time and click Apply. The schedule covers all RAID 5 and RAID 6 groups. QNAP recommends a time when the NAS is not in use, such as after business hours or on weekends, and running it at least once a month.

In QuTS hero, enable Pool scrubbing schedule in the same place. QNAP says you can also click Exclude Times to set when the schedule should be suspended.

Reboots restart it from the beginning

QNAP's QuTS hero FAQ says that if a scheduled reboot or shutdown happens during an active scrubbing task, the task is interrupted and must restart from the beginning. Its worked example has business hours of Monday to Friday 8:00 to 19:00, a reboot every Sunday at 3:00, and a largest pool that needs about 30 hours to scrub. QNAP sets a monthly schedule starting on the first Friday at 20:00 and adds Exclude Times for business hours and the Sunday reboot. That way the task finishes before the reboot.

To check progress, select the storage pool in Storage & Snapshots, and check logs or notifications for completion or errors. If scrubbing is interrupted, QNAP recommends restarting it manually as soon as possible.

When to stop and get help

QNAP notes that menu names can differ slightly between QuTS hero versions. If you cannot find a setting, look for Storage Global Settings in Storage & Snapshots.

Questions

Why is my QNAP NAS slow during RAID scrubbing?

QNAP says the read and write speeds of the RAID group may decrease while RAID scrubbing runs, so it recommends scheduling it when the NAS is not in use.

How long does QNAP RAID scrubbing take?

QNAP does not give a fixed time; it says scrubbing may take a long time on large storage pools or pools with a lot of data. Its example pool needs about 30 hours.

Does a reboot stop QNAP scrubbing?

Yes. QNAP's QuTS hero FAQ says a reboot or shutdown during scrubbing interrupts it, and it must restart from the beginning.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.