NAS Codex › QNAP › QNAP Let's Encrypt certificate won't install or renew
QNAP Let's Encrypt certificate won't install or renew
QTS can request a free certificate from Let's Encrypt so you can reach your QNAP NAS over HTTPS without a browser warning. QNAP says the system validates the domain before it installs the certificate, and it lists conditions that the domain, its DNS record and your router must meet. QNAP documents two different places to request the certificate, and they don't accept the same domains.
Written against: QTS 5.0 and later (QNAP FAQ last modified 2025-08-01; QTS 5.0.x manual: Replacing the Server Certificate, Installing an SSL Certificate). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
First check which domain you used. QNAP says the Let's Encrypt option inside the myQNAPcloud app works only with your myqnapcloud domain. For your own domain, use Control Panel > System > Security > SSL Certificate & Private Key > Replace Certificate, and make sure the domain points to the NAS's public IP and that port 80 is forwarded from your router to the NAS.
Two places to get a Let's Encrypt certificate
QNAP's documentation describes two routes, and using the wrong one for your domain is the first thing to rule out.
- myQNAPcloud app > SSL Certificate. QNAP says myQNAPcloud SSL web service certificates and Let's Encrypt certificates installed here can only be used with the myqnapcloud domain. They are installed with the myQNAPcloud DDNS service.
- Control Panel > System > Security > SSL Certificate & Private Key. This is the route QNAP describes for a custom domain that you registered through a DDNS provider or an external DNS provider.
Custom domain: the three conditions QNAP lists
QNAP says all three must be true before you install a Let's Encrypt certificate for a custom domain:
- The NAS must be accessible from the internet using the custom domain (for example, yourname.ddns.net).
- Port 80 (HTTP) must be open and properly forwarded from your router to the NAS.
- The custom domain must resolve to the NAS's public IP address.
The QTS manual adds that QNAP recommends using port 80 or 443 for authorizing the SSL certificate domain and accessing the internet.
Request the certificate for a custom domain
- Go to Control Panel > System > Security > SSL Certificate & Private Key.
- Go to Server Certificate and click Replace Certificate.
- Select Get from Let's Encrypt and click Next.
- Enter the domain name, a valid email address and, if you need them, alternative names. Click Apply.
QNAP's limits on these fields:
- The domain name can contain up to 63 ASCII characters, with no spaces.
- Separate several alternative names with a comma, for example
123.web.com,789.web.com. - The email address receives renewal notifications.
QNAP says the system then attempts to validate the domain and installs the certificate automatically. Once that succeeds, the NAS uses the Let's Encrypt certificate for HTTPS connections.
Request or renew with your myqnapcloud domain
- Open myQNAPcloud and go to SSL Certificate.
- Under Let's Encrypt, click Download and install.
- Enter a valid email address. QNAP says it is required for the Let's Encrypt account registration.
- Optionally select Automatically renew domain before expiration.
- Click Confirm. myQNAPcloud applies the certificate and displays its details.
If a certificate installed this way expired instead of renewing, check whether that option is selected. To remove a certificate installed this way, QNAP says to click Release and then Confirm.
Locked out of HTTPS after changing the certificate
The same Replace Certificate window also lets you import a certificate and private key from your computer. QNAP warns that the NAS supports only X.509 PEM certificates and private keys, and that uploading an invalid certificate may prevent you from signing in to the NAS through SSL. QNAP says the fix is to restore the default certificate and private key.
When to stop and get help
If you can no longer sign in over HTTPS after replacing the certificate, QNAP says to restore the default certificate and private key before trying Let's Encrypt again.
Questions
Why can't I use a Let's Encrypt certificate from myQNAPcloud with my own domain?
QNAP says Let's Encrypt certificates installed in the myQNAPcloud app can only be used with the myqnapcloud domain. For a custom domain, use Replace Certificate in Control Panel's SSL Certificate & Private Key page.
What does a QNAP NAS need for a Let's Encrypt certificate on a custom domain?
QNAP says the NAS must be reachable from the internet by that domain, port 80 must be open and forwarded from the router to the NAS, and the domain must resolve to the NAS's public IP address.
How do I make QNAP renew the Let's Encrypt certificate automatically?
When you install it from myQNAPcloud > SSL Certificate, select 'Automatically renew domain before expiration'. QNAP says the email you enter is required for the Let's Encrypt account registration.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.