NAS Codex › QNAP › QNAP 2-step verification: lost phone or security code not accepted
QNAP 2-step verification: lost phone or security code not accepted
With 2-step verification turned on, QTS asks for a 6-digit security code from an authenticator app after your username and password. If the phone is lost or the code is not accepted, QNAP documents three ways back in: the alternative verification method you chose at setup, another administrator turning 2-step verification off for you, or a short press of the NAS reset button.
Written against: QTS 2-step verification (QNAP tutorial last modified 2020-11-26; FAQs last modified 2023-05-31 and 2026-10-27). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
On the security code screen, choose Verify another way and use the alternative method you set up: a security code sent by email, or your security question. If that is not available and another administrator can sign in, ask them to turn off 2-step verification for your account.
Why the security code is rejected
QNAP's setup tutorial says the system time of your mobile device and the NAS must be synchronized, and recommends using time provided from the Internet. The code comes from an authenticator app using the Time-based One-Time Password (TOTP) protocol, such as Google Authenticator.
Failed attempts follow the rules in Control Panel > Security > Network Access Protection, which QNAP says are there to prevent unwanted intrusions.
Option 1: Verify another way
When 2-step verification is set up (Options > 2-step Verification > Get Started), step 3 of the wizard asks for an alternative method in case you cannot use your mobile device: an emailed security code or a security question. QNAP notes that emailing a code needs the SMTP server set up in Control Panel > Notification > E-mail.
If you cannot use your mobile device or it is lost, select Verify another way at sign-in. Each user gets five attempts at the emailed code or security question, and the counter resets after a successful login. Past that limit, the user has to ask a NAS administrator to disable 2-step verification.
Option 2: Another administrator turns it off
QNAP says administrators can disable 2-step verification for other users who are locked out, in Control Panel > Users > Edit Account Profile. Once you are signed in again, you can turn it off yourself under Options > 2-step Verification > Stop.
Option 3: The reset button (only administrator locked out)
If an administrator cannot use a mobile device and no other administrator is available, QNAP says to restore the NAS settings with the reset button (Basic System Reset). QNAP's FAQ for QTS 4.4.3 and later says pressing the reset button for 3 to 5 seconds disables 2-step verification:
- Find the reset button on the back of the NAS.
- Press it with a pin or paperclip for 3 to 5 seconds.
- The NAS beeps to confirm the reset.
QNAP says this does not delete any data on the NAS, but the admin account's login credentials are restored to their default values, and you may need Qfinder Pro to reach the NAS afterward. If nothing changes after pressing for 3 seconds, the reset button may be disabled, and QNAP says to contact its support.
The default admin password after a reset
QNAP's FAQ on the default "admin" account says the password depends on the firmware version:
- QTS/QuTS hero 5.2.0 and later: the default admin account is disabled by default but is automatically enabled again after a system reset. Its password is the device's Cloud Key in uppercase, without special characters (Q1234-5678 becomes Q12345678). The Cloud Key is on the sticker on the NAS, in the Quick Installation Guide, in Qfinder Pro (Details), or in myQNAPcloud under Device Management.
- 4.4.2 to 5.1.x: the password is the NAS's first MAC address in uppercase without special characters.
- Older versions: admin / admin.
QNAP notes these defaults do not apply to a different administrator account you created during setup, and recommends creating a new administrator account and disabling "admin".
When to stop and get help
To avoid being locked out again, QNAP's tutorial says you can add more than one mobile device to the same account by scanning the same QR code during setup. Keep the NAS and phone clocks in sync, and set up the email or security-question fallback.
Questions
I lost my phone. How do I sign in to my QNAP NAS with 2-step verification?
QNAP says to choose Verify another way and use the emailed security code or security question you set up. Another administrator can also disable 2-step verification for you in Control Panel > Users > Edit Account Profile.
Does pressing the QNAP reset button delete my data?
QNAP says pressing the reset button for 3 to 5 seconds to disable 2-step verification does not delete any data, but it restores the admin account's login credentials to their default values.
Can I use two phones for QNAP 2-step verification?
Yes. QNAP says you can use different mobile devices for the same account by scanning the same QR code during setup.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.