NAS Codex › QNAP › Can't connect to the QNAP FTP server (QuFTP Service)

Can't connect to the QNAP FTP server (QuFTP Service)

QNAP NAS models run their FTP server through QuFTP Service. When an FTP client can't reach it, times out, or signs in but can't list or open folders, the cause is usually one of the settings QNAP's QuFTP guides walk through: the server itself, the ports, passive mode behind a router, folder permissions, or a QuFirewall rule.

Written against: QuFTP Service on QTS (QNAP tutorials last modified 2021-08-12 and 2023-12-26; QNAP FAQ last modified 2022-06-24). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

Check four things in this order: Enable the FTP server is ticked in QuFTP Service > FTP Server > System > General; your router forwards port 21 (and the passive port range) to the NAS; the FTP user has permission on the shared folder; and, if QuFirewall is installed, an allow rule for FTP sits above its "deny all" rule.

1. Make sure the FTP server is on

  1. Open QuFTP Service and go to FTP Server > System > General.
  2. Select Enable the FTP server.
  3. Choose the protocol. FTP (Standard) is enabled by default and uses port 21. FTP with SSL/TLS (Explicit) secures the connection with the configured certificate and TLS settings.
  4. Check the FTP port number. By default FTP uses port 21; the client must use the same port.
  5. Click Apply. QuFTP Service applies the settings and restarts.

QNAP warns that before you select TLS 1.2 or later, all FTP clients must support TLS 1.2.

2. Connecting from outside your network

QNAP says that if the NAS is behind a NAT router, you must allow traffic on the FTP service ports on the router and forward them to the NAS:

Port forwarding may be called NAT server or virtual server on your router; QNAP says to check the router's documentation. On QNAP's own QHora and QMiro routers, turning on FTP ALG configures the forwarding automatically.

3. Passive mode settings

In QuFTP Service > FTP Server > System > Connection, QNAP documents the passive FTP settings:

If clients connect from outside your network, forward the passive range on your router as well as port 21, as QNAP describes for the FTP service ports.

4. QuFirewall blocking FTP

QNAP says QuFirewall's default profiles add a "deny all" rule with the lowest priority, and FTP uses TCP ports 20-21 by default. To let FTP through, go to QuFirewall > Firewall Profiles > Add Profile > Create Profile, add an allow rule for the FTP service, and move it above the "deny all" rule.

5. Signed in but can't open a folder

QuFTP Service has its own permissions for FTP users and groups. QNAP lists four levels for each shared folder:

To change them, go to FTP Server > Users (or Groups) and open Edit Shared Folder Permission. QNAP notes that FTP users can only use the FTP server application, and that folders protected by FTP WORM cannot be erased or modified by FTP users.

If you turned on Set root folder, QNAP says you must first give all FTP clients access to that root folder in Users > Edit Shared Folder Permission, or in Control Panel > Privilege > Shared Folders.

Connection limits

The same Connection page sets the maximum number of FTP connections and the maximum connections per user. If extra clients are refused while others work, check these limits.

When to stop and get help

QNAP does not recommend anonymous FTP: it lets anyone use the FTP service without identifying themselves. Turn it on only if you understand that risk.

Questions

What ports does a QNAP NAS use for FTP?

QNAP says FTP uses TCP ports 20-21, with port 21 as the default FTP port. The default passive FTP port range in QuFTP Service is 55536-56559.

How do I set passive FTP on a QNAP NAS?

Check the passive port range in QuFTP Service > FTP Server > System > Connection, forward that range on your router, and enable 'Respond with external IP address' if the NAS is behind NAT.

Does QuFirewall block FTP on QNAP?

It can. QNAP says the default profiles end with a deny-all rule, so add an allow rule for FTP (TCP 20-21) and move it above the deny-all rule.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.