NAS Codex › QNAP › External USB drive not showing or not accessible on a QNAP NAS
External USB drive not showing or not accessible on a QNAP NAS
QNAP says the most common reason a user cannot reach an external drive is permissions: by default, only administrators can access a newly connected external drive. This page sets out that FAQ, where QTS lists external drives, and how to format a drive the NAS cannot read, from QNAP's FAQ and the QTS 5.1 user guide.
Written against: QTS 5.0.0.1707 (2021-06-22) and later and QuTS hero h5.0.0.1772 (2021-08-26) and later (QNAP FAQ last modified 2022-12-21) and the QTS 5.1.x user guide. Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Sign in to QTS as an administrator, plug the drive in, and open File Station. If the drive is not in the navigation panel, plug it into another USB port. Once it shows, give other users access in Control Panel > Privilege > Shared Folders: find the external drive, click Edit Shared Folder Permission, and choose Read Only or Read/Write for each account.
Why you cannot see the drive
QNAP says a common reason users cannot access an external drive is that they are not signed in as an administrator or as a user with permission for that drive. By default, non-administrators cannot access an external drive until an administrator gives them permission. This applies from QTS 5.0.0.1707 and QuTS hero h5.0.0.1772 onwards.
Step 1: check the NAS detects the drive
- Sign in to QTS or QuTS hero as an administrator.
- Plug the external drive into a USB port.
- Open File Station and check that the drive appears in the navigation panel.
- If it does not appear, plug it into another USB port, and repeat until it does.
The QTS 5.1 user guide adds that QTS supports external USB and eSATA storage such as flash drives, portable hard drives and storage enclosures. Once connected, the device and all of its readable partitions appear in Storage & Snapshots > Storage > External Storage, and QTS creates a shared folder for each readable partition.
Step 2: give other users access
- Go to Control Panel > Privilege > Shared Folders > Shared Folder.
- Find the external drive in the list.
- Under Action, click the Edit Shared Folder Permission icon.
- Find the non-administrator account and select Read Only or Read/Write.
- Click Apply. That account can now open the drive.
If the drive shows but has no readable partition
QTS creates a shared folder for each partition it can read. If you want to use the drive with the NAS and do not need what is on it, the QTS 5.1 user guide describes formatting it:
- Go to Storage & Snapshots > Storage > External Storage and select the disk or partition.
- Click Actions and choose Full Disk Format or Format.
- Choose a file system. QNAP's guidance:
- NTFS for Windows.
- HFS+ for macOS.
- FAT32 for Windows, macOS, NAS devices and most cameras, phones, consoles and tablets, with a maximum file size of 4 GB.
- exFAT for Windows, macOS and some cameras, phones, consoles and tablets; check your device supports exFAT first.
- EXT3 or EXT4 for Linux and NAS devices.
- Enter a label of 1 to 16 characters (letters, numbers and hyphens).
- Optionally enable AES encryption with a password of 8 to 16 characters. QNAP warns that if you forget the encryption password, the storage becomes inaccessible and all data is lost, and that saving the key on the NAS can allow unauthorized access by anyone with physical access to it.
- Click Format, then OK at the warning.
When to stop and get help
Formatting wipes the drive, so copy off anything you need on another computer first. If the drive appears in File Station for administrators but not for other users, QNAP says that is down to permissions: grant access as in step 2. If you were plugging in the drive for backups and the job is failing, see HBS 3 job completed with warning or failed.
Questions
Why can't I see my USB drive on my QNAP NAS?
QNAP says the usual reason is permissions: by default only administrators can access a new external drive. Sign in as an administrator, check File Station, and try another USB port if it does not appear.
How do I let other users access a USB drive on a QNAP NAS?
QNAP says to go to Control Panel > Privilege > Shared Folders, find the external drive, click Edit Shared Folder Permission, and give the account Read Only or Read/Write.
Which file system should I format a QNAP external drive to?
QNAP lists NTFS for Windows, HFS+ for macOS, FAT32 for the widest compatibility (4 GB maximum file size), exFAT for devices that support it, and EXT3 or EXT4 for Linux and NAS devices.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.