NAS Codex › QNAP › TV or media player can't see the QNAP DLNA media server

TV or media player can't see the QNAP DLNA media server

A QNAP NAS can stream music, photos and video to smart TVs, game consoles and media players over DLNA. When the TV cannot see the NAS at all, or sees it but shows nothing, QNAP's FAQs point to a short list of causes on the NAS, the local network and the router.

Written against: DLNA Media Server / Media Streaming add-on on QTS and QuTS hero (QNAP FAQs last modified 2022-06-24, 2023-10-11 and 2025-06-17). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.

Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.

Fast Answer

Check that the DLNA server is turned on: QNAP says the Media Streaming add-on must be enabled, and DLNA Media Server must be enabled in Control Panel > Applications > DLNA Media Server.

1. Make sure the DLNA server is running

QNAP's first check is that the Media Streaming add-on is enabled and that DLNA Media Server is enabled in Control Panel > Applications > DLNA Media Server.

2. Make sure media has been added to DLNA

If the TV sees the NAS but shows no files, QNAP says to check that Multimedia Console is enabled and that media content has been added to DLNA in Multimedia Console > Content Management.

3. Put the NAS and the TV on the same network

QNAP notes that the NAS and the media player may not be on the same local network. Some routers split wired and wireless connections into separate networks. The NAS and the TV need to be on the same subnet for the DLNA server and the TV to find each other.

4. Enable UPnP and multicast on the router

QNAP explains that UPnP uses multicasting to broadcast packets across the network, and some routers either don't support multicasting or block UPnP by default. Make sure UPnP and multicasting are enabled on your router. If the router does not support them, QNAP says you may need to use another router on your network.

Files show but sort only alphabetically

If a new smart TV lists NAS media only in alphabetical order, while other TVs sort the same files correctly, QNAP says the NAS setup is probably fine. The cause is most likely limited DLNA/UPnP support in the TV's software, which may use a stripped-down media browser that ignores other file metadata.

QNAP describes DLNA as increasingly considered a legacy technology. It says newer smart TVs, especially from Samsung and LG, often offer limited DLNA features, which can mean forced alphabetical sorting, no metadata and poor subtitle handling. For a more flexible setup, QNAP recommends a media server app such as Plex, Emby or Jellyfin.

When to stop and get help

If another TV on the same network handles the same NAS files correctly, QNAP says your NAS setup is probably correct and the limit is in the problem TV's DLNA support.

Questions

Why can't my TV see my QNAP DLNA server?

QNAP says to check that the Media Streaming add-on and DLNA Media Server are enabled, that the NAS and TV are on the same subnet, and that UPnP and multicasting are enabled on the router.

Why does my TV see the QNAP NAS but show no files?

QNAP says to check that Multimedia Console is enabled and that media content has been added to DLNA in Multimedia Console > Content Management.

Why does my smart TV only sort QNAP media alphabetically?

QNAP says this is most likely limited DLNA support in the TV's software, not a NAS issue, and recommends apps such as Plex, Emby or Jellyfin.

Sources

Every fact on this page comes from the vendor documents below, opened on 2026-11-17.