NAS Codex › QNAP › QNAP thumbnails not generating, or photos missing in QuMagie
QNAP thumbnails not generating, or photos missing in QuMagie
QuMagie and other QNAP apps show photos and videos using thumbnails made by Multimedia Console. When a file shows a plain generic icon, or does not appear at all, QNAP's FAQs list the reasons: the format, a missing license, thumbnail or indexing settings, the folder it is in, permissions, or the file being too large for the NAS's memory.
Written against: Multimedia Console and QuMagie on QTS and QuTS hero (QNAP FAQs last modified 2024-12-03, 2026-02-23 and 2026-07-30). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Open Multimedia Console. Under Thumbnail Generation, check the toggle is on and the status is Completed. Under Indexing, check the Index field says Completed rather than "Indexing...". Then check the file is in one of QuMagie's content source folders and in a supported format.
Why a thumbnail is not generated
- Unsupported format: if the format or codec is not supported, Multimedia Console cannot make a thumbnail.
- A license is needed: some formats need a CAYIN license. QNAP's format list shows that without one, QuMagie and Photo Station support BMP (Intel processors only), JPG, JPEG, GIF, PNG, TIF, TIFF, TGA, WebP and many RAW formats. The Basic license adds formats such as AVC (H.264), MPEG-2, MPEG-4, VP8, VP9 and VC-1. HEIF and HEVC (H.265) need the Plus license.
- Thumbnail generation off or still running: in Multimedia Console > Thumbnail Generation, make sure the toggle is on and wait until the status is Completed. Under Advanced settings, check your files are not excluded.
- Not indexed yet: in Multimedia Console > Indexing, the Index field shows "Indexing..." until it finishes. Wait for "Completed".
- File too large for the NAS's memory: QNAP lists size limits. With Multimedia Console 2.7.0 and later, no thumbnail is made if the image is over 500,000,000 pixels. With 4096 MB of RAM or less the limit is 240,000,000 pixels, with 2048 MB or less it is 51,000,000, and with 1024 MB or less it is 20,000,000. A file larger than 1/8 of the NAS's total RAM also gets no thumbnail, and for TS files the limit is 60 MB.
Why a photo does not appear in QuMagie at all
- Not in a content source folder: QuMagie only shows files from its content source folders, which must be shared folders. Add the folder under Multimedia Console > Content Management > QuMagie tab > Content Sources > Edit, or move the file into an existing source folder.
- No read permission: give the user Read Only or Read/Write on the shared folder (Control Panel > Privilege > Shared Folders), and Read on the file itself (File Station > Properties > Permissions).
- QuMagie hides files without thumbnails: in QuMagie, open your profile icon > Settings > Miscellaneous > Display and turn off Only display media files with generated thumbnails.
If the index is corrupted: re-index
QNAP says the system media index can become corrupted and there is no way to confirm it, but you can rebuild it: Multimedia Console > Indexing > Settings > Re-index. This re-indexes all media files in your content source folders and can take a while.
When to stop and get help
Before re-indexing, note QNAP's warning: it deletes and rebuilds all indexed data, including thumbnails, media file tags and QuMagie albums. The media files themselves are not affected. If thumbnails still fail after all of this, QNAP says to contact its support.
Questions
Why is my QNAP NAS not generating thumbnails?
QNAP lists an unsupported format, a format that needs a CAYIN license, thumbnail generation turned off or still running, files not yet indexed, a corrupted media index, or a file too large for the NAS's memory.
Why don't my photos show up in QuMagie?
QNAP says the folder may not be a QuMagie content source folder, you may lack read permission, QuMagie may be set to hide files without thumbnails, or the files are not indexed yet.
Does QuMagie support HEIC or HEVC files?
QNAP's format list says HEIF and HEVC (H.265) need a CAYIN MediaSign Player Plus license; without a license QuMagie supports formats such as JPG, PNG, WebP and RAW.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.