NAS Codex › Synology › Time Machine backup to a Synology NAS failed: what Synology says to check
Time Machine backup to a Synology NAS failed: what Synology says to check
Time Machine on your Mac will not back up to your Synology NAS, or a backup that used to work now fails. Synology's Knowledge Center has a checklist for failed Time Machine backups, a setup guide, and an article on quotas, which matter because a backup can fail when the quota runs out. This page sets out what they say, NAS first, then the Mac.
Written against: Synology Knowledge Center articles for DSM 7 series and DSM legacy versions. Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
In DSM, go to Control Panel > File Services > SMB > Advanced Settings and set the maximum SMB protocol to SMB3 with Enable Opportunistic Locking, Enable SMB2 lease and Enable SMB durable handles selected. Under File Services > Advanced > Bonjour, enable Bonjour service discovery and the Time Machine broadcast via SMB, and set the Time Machine folder. Turn off the recycle bin for that folder and make sure there is free space. On the Mac, check it connects over SMB3, try a wired connection, and turn off antivirus software as a test.
On the Synology NAS
Synology's article on failed Time Machine backups lists these checks for the NAS:
- Make sure the NAS has enough free space.
- In Control Panel > File Services > SMB > Advanced Settings > General: set Maximum SMB protocol to SMB3, and select Enable Opportunistic Locking, Enable SMB2 lease and Enable SMB durable handles (Synology notes that cross-protocol file locking is then disabled).
- In Control Panel > File Services > Advanced > Bonjour: select Enable Bonjour service discovery to locate Synology NAS and Enable Bonjour Time Machine broadcast via SMB, then use Set Time Machine Folders.
- Turn off the recycle bin for the Time Machine folder.
- Try creating a new shared folder and setting it as the Time Machine backup folder.
- If it is not already, move the Time Machine backup folder to an ext4 or Btrfs volume.
Synology's setup guide adds that it does not recommend the recycle bin or encrypted shared folders for a Time Machine destination; to encrypt backups, use Time Machine's own encryption option on the Mac instead. It also says to create a DSM user for Time Machine with read and write permission on the folder, and to set a quota.
Quotas: why a backup can run out of room
Synology's quota article suggests a quota so Time Machine data does not take up too much of the volume. You can set a user quota (in Control Panel > User & Group > User, when creating the Time Machine user) or a shared folder quota (in Control Panel > Shared Folder, Edit > Advanced > Enable shared folder quota). Synology notes that per-folder user quotas and shared folder quotas are available only on models that support Btrfs; on ext4-only models you can set user quotas for volumes.
On size, Synology says the quota should be at least two to three times the size of the Mac's drive or of the data being backed up, as a guideline, since the space needed depends on how much data has changed. If the remaining quota is smaller than the changed data, the backup may fail.
On the Mac
Synology's checklist for the Mac:
- Make sure the Mac is properly configured for Time Machine; you may need to remove the current backup disk and set it up again.
- Make sure the Mac has enough free space, and that the Mac and NAS are on the same local network.
- Make sure the Mac connects over SMB3. In DSM, check Resource Monitor > Connections; if it does not say SMB3, Synology says you may need to contact Apple.
- Use a wired connection if possible, or move the Mac somewhere with a stronger Wi-Fi signal.
- Start the Mac in safe mode and try again. If that works, remove third-party software or contact its vendor.
- Deactivate or uninstall security and antivirus software. Synology names Bitdefender, BullGuard Antivirus, Cortex XDR, Norton Security and Sophos Home as commonly causing issues.
- If the Mac does not use an Apple silicon processor, try backing up via AFP.
- Try backing up to another device, such as an external drive, another Mac or a Time Capsule. If that fails too, Synology says there could be an issue with the Mac and to contact Apple Support.
If the backup still fails after all of these, Synology says to collect logs, including DSM system logs from Support Center > Support Services > Generate Logs, and contact Synology.
Setting the folder up again
Synology's setup guide: create a shared folder in Control Panel > Shared Folder, enable the SMB service in Control Panel > File Services > SMB, and set up the Bonjour broadcast and SMB settings above. On the Mac (macOS Ventura 13 or later), open System Settings > General > Time Machine, click Add Backup Disk, and pick the folder. If it does not appear, connect in Finder with Go > Connect to Server using smb://, the NAS's data IP address (not the management IP) and the folder name. Synology notes macOS Sierra 10.12 and later use SMB for Time Machine by default, says Apple has removed AFP support since macOS Big Sur 11.0, and recommends using only SMB.
When to stop and get help
Turning off antivirus software and booting into safe mode are tests, not fixes: Synology says to remove the conflicting software or contact its vendor if one of them makes the backup work. Keep the quota large enough for your changed data, because Synology says a backup may fail when the remaining quota runs out. If shared folders do not open from Windows either, see can't access a Synology shared folder via SMB.
Questions
Why does Time Machine to my Synology NAS keep failing?
Synology says to check free space, set SMB3 with opportunistic locking, SMB2 lease and durable handles, enable the Bonjour Time Machine broadcast, turn off the recycle bin for the folder, and on the Mac check the SMB3 connection, Wi-Fi and antivirus software.
How big should the Synology Time Machine quota be?
Synology suggests at least two to three times the size of the Mac's drive or of the data being backed up, as a guideline. If the remaining quota is smaller than the changed data, the backup may fail.
Should I use AFP or SMB for Time Machine on Synology?
Synology says macOS Sierra 10.12 and later use SMB by default and that Apple has removed AFP support since macOS Big Sur 11.0. It recommends using only SMB, though its checklist suggests trying AFP on Macs without Apple silicon.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.