NAS Codex › Synology › Synology Storage Manager shows more storage used than your files add up to: how Synology says to find it
Synology Storage Manager shows more storage used than your files add up to: how Synology says to find it
Storage Manager says the volume is much fuller than your shared folders and LUNs add up to. Synology's article on this gives a four-step order: check the volume's Usage Details, check the services that commonly hold space, look for unusually large folders over SSH, and only then contact support. This page follows that order and adds Synology's guidance on the two most common hidden users: snapshots and Recycle Bins.
Written against: Synology Knowledge Center articles for DSM 7 series, DSM legacy versions and DSM Enterprise (PAS), and DSM 7 help (Enable Recycle Bin). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Open the volume's Usage Details in Storage Manager to see which category holds the space (Shared Folder, LUN/VMM, Snapshot, Synology Drive and others). Then check the usual suspects: Snapshot Replication, Synology Drive or Cloud Station, Download Station, Active Backup for Business, Hyper Backup and the shared folders' Recycle Bins. If snapshots hold the space, delete older snapshots in Snapshot Replication. If Recycle Bins do, empty them at Control Panel > Shared Folder. Synology says freed space may not show at once, because space reclamation runs periodically.
When this applies
Synology describes the symptom as overall storage usage being high even though all the shared folders and LUNs combined do not take much space. It recommends keeping volume usage below 80% to prevent performance issues and errors with packages or services.
Step 1: check the volume's Usage Details
On DSM 7 and DSM Enterprise (PAS), the volume's Usage Details show whether a service takes a large share of the volume. The categories Synology lists are:
- Shared Folder
- LUN/VMM
- Namespace
- vVol
- Synology Drive
- Hybrid Share Folder
- Snapshot
- Others, such as system and package configuration files and user data
Step 2: check the services that commonly hold space
Synology names these applications and services as ones that may take a large amount of storage:
- Synology Drive or Cloud Station
- Snapshot Replication
- Download Station
- Active Backup for Business
- Recycle Bins of shared folders
- Hyper Backup
For Hyper Backup, Synology recommends enabling backup rotation or lowering the maximum number of versions.
Snapshots: why deleted files still take space
Synology's snapshot article explains that the snapshot files themselves are very small. What takes volume space is the data blocks the snapshots preserve. A snapshot records a storage space at a point in time by pointing to data blocks. When a file is changed or deleted, its original blocks are kept as part of one or more snapshots and the changes go to new blocks. So deleting a file does not free its blocks while any snapshot still points to them, and the older a snapshot is, the more space it may take.
To see how much space shared folder snapshots hold (only shared folder snapshots can be calculated):
- Go to Snapshot Replication > Snapshots.
- Select a shared folder and click Snapshot > Calculate Size.
- Pick a time range of at least a week, then click Calculate Now.
- When it finishes, click the arrow beside the shared folder to see the estimated size of the blocks those snapshots preserve.
To delete snapshots, select a shared folder, LUN or namespace, click Snapshot > Snapshot List, select one or more snapshots and click Remove. Synology recommends deleting older snapshots first, because they may point to blocks of files that no longer exist.
Recycle Bins: deleted files that are not gone yet
Synology says files that have not been permanently deleted still take up storage space. DSM 7 help says Enable Recycle Bin is selected by default when you create a shared folder, and deleted files go to a subfolder until you empty it. If the Recycle Bin is disabled, deletions are permanent. WriteOnce shared folders have no Recycle Bin.
- Empty one shared folder's Recycle Bin: Control Panel > Shared Folder, select the folder, click Edit, then Empty Recycle Bin.
- Empty all Recycle Bins: Control Panel > Shared Folder, then Action > Empty all Recycle Bins.
Why the space does not come back at once
Synology says emptying the Recycle Bin may not free space immediately, because the system needs time to reclaim unused space from deleted shared folders. Deleted snapshots are the same: space reclamation runs periodically, so their space is not released right away. You can set the space reclamation schedule in Storage Manager. If space is still short after that, Synology says other snapshots or file clones may be taking it.
Step 3: look for unusually large folders over SSH
- Sign in to the Synology system via SSH.
- Go to the volume, for example
cd /volume1for Volume 1. - Run
du -h -d1 | sort -h -r. Synology notes it may take time.
Synology's guide to the folders you may see:
@synologydrive/@cloudstation: the shared folder of Synology Drive or Cloud Station@sharesnap: shared folder snapshots@iSCSI: LUNs and their snapshots@NVMeoF: namespaces and their snapshots@download: the shared folder of Download Station@ActiveBackup: the shared folder of Active Backup for Business@img_bkp_cache: the shared folder of Hyper Backup
Step 4: contact Synology Technical Support
If the problem persists, Synology asks you to contact Technical Support through Support Center on the NAS, with the actions you have taken to free space and the results of the du command.
When to stop and get help
DSM help says emptying a Recycle Bin deletes its files permanently, so check it holds nothing you still need before you empty it. If the volume has gone read-only or crashed rather than just filling up, see volume read-only instead. If a DSM update fails for lack of space on the system partition, see insufficient system capacity for update.
Questions
Why does my Synology show more storage used than my files?
Synology lists snapshots, Synology Drive or Cloud Station, Download Station, Active Backup for Business, Hyper Backup and shared folder Recycle Bins as common causes. The volume's Usage Details in Storage Manager show which category holds the space.
Why didn't deleting files free space on my Synology?
Synology says snapshots keep the data blocks of deleted files until the snapshots are removed, and files in a Recycle Bin are not permanently deleted. Even after cleanup, space reclamation runs periodically, so the space may come back later.
What volume usage does Synology recommend?
Synology recommends keeping volume usage below 80% to prevent performance issues and potential errors with packages or services.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.