NAS Codex › QNAP › QNAP: you deleted a shared folder but the storage space did not come back
QNAP: you deleted a shared folder but the storage space did not come back
You removed a shared folder in QTS, but the volume is just as full as before. QNAP's FAQ says this is by design: deleting a shared folder removes only its path unless you tick Also delete the data. This page gives QNAP's steps to find and fully remove that leftover data, its check for space shown as "Other" in Resource Monitor, and what QNAP says the "Sys. Reserved" space in Storage & Snapshots is.
Written against: QTS, Resource Monitor and Storage & Snapshots (QNAP FAQs last modified 2022-06-24, 2024-04-10 and 2026-05-05). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
The data from the deleted shared folder is probably still on the volume. QNAP's fix: go to Control Panel > Privilege > Shared Folders > Shared Folder, click Create > Shared Folder, give it a name, choose Enter path manually and select the old folder's path, then finish the wizard. Then select that shared folder, click Remove, tick Also delete the data and click Yes. If you are not sure which folders are left over, compare a du listing over SSH with the shared folder list, as below.
Why the space did not come back
QNAP says that in QTS, deleting a shared folder by default removes only the shared folder path. The data in it is kept unless you choose to also delete the data in the deletion confirmation. QNAP says this is designed to prevent accidental deletion of critical files. If you did not delete the data, the files from the deleted shared folder still exist on the NAS, and you will see them if you use snapshot services or access the NAS from the command line.
QNAP's fix: recreate the folder, then remove it with its data
If you already deleted the shared folder without its data, QNAP says you must recreate it first. If you are deleting a shared folder for the first time, skip step 4.
- Log on to QTS as an administrator.
- Open Control Panel.
- Go to Privilege > Shared Folders > Shared Folder.
- Recreate the deleted shared folder: click Create > Shared Folder, enter the folder name, next to Path select Enter path manually, and select the path of the shared folder you deleted. Click Next, Next, then Finish. QTS recreates the shared folder.
- Select the shared folder you want to fully delete and click Remove.
- In the confirmation message, select Also delete the data and click Yes. QNAP says the shared folder and its contents are deleted from the NAS.
Space shown as "Other" in Resource Monitor
QNAP has a separate FAQ for when Other takes up too much of the storage usage in Resource Monitor. Its steps find folders that hold data but are no longer shared folders:
- Access the NAS over SSH and run QNAP's command, which lists the folders using the most space on the default volume. QNAP says it takes a while to finish:
du $(/sbin/getcfg SHARE_DEF "defVolMP" -f /etc/config/def_share.info) --max-depth=1 -xh | grep G | sort -nr - Log in to QTS as an administrator and open Control Panel > Privilege > Shared Folder.
- Compare the two lists. A folder that appears in the
duresult but not in the shared folder list can be restored as a shared folder: Create > Shared Folder, enter the name, select Enter path manually, select the folder path, and click Create. - If you want that folder gone, remove it again with Also delete the data ticked.
QNAP lists system files and folders that also take storage space and are not shared folders:
.qpkg: application files.swap: the system swap file.versioning: used by the Qsync Versioning function
What "Sys. Reserved" is
In Storage Manager and Storage & Snapshots, part of the space is shown as Sys. Reserved. QNAP says QTS uses it for configuration information and metadata related to volumes, and that it is required for proper NAS operation. It has three parts:
- QNAP storage reserved space: storage configuration data and extra space for NAS functions, about 70 GB for each storage pool and 20 GB for each static volume.
- QNAP RAID reserved space: RAID metadata, 1% of the total capacity of each RAID group, up to 150 GB per group.
- EXT4 file system metadata space: a percentage of each volume. Larger volumes need less. For volumes over 100 GB it is between 0.8% and 1.8% of the volume.
QNAP says System Reserved can also include space for Snapshot Replica. When Snapshot Replica sends snapshots from a source NAS to a destination NAS, the destination secures storage pool space for the incoming backup data and counts it under System Reserved. That space matches what the backup data will occupy, and it is fully used once the transfer completes. Removing a Snapshot Vault from the destination NAS releases it. QNAP says a pool with a Snapshot Vault showing a larger System Reserved value is expected behavior, not a storage error.
When to stop and get help
Removing a shared folder with Also delete the data ticked deletes its contents from the NAS, so make sure you are removing the right path. When you recreate a folder from the du list, check it is not one of the system folders QNAP names (.qpkg, .swap, .versioning). If the volume has run so low on pool space that it shows Read/Delete, see volume status Read/Delete.
Questions
Why didn't deleting a shared folder free up space on my QNAP?
QNAP says QTS removes only the shared folder path by default. The data stays on the NAS unless you select Also delete the data when you confirm the deletion, which QNAP says is designed to prevent accidental deletion of critical files.
How do I remove the data from a QNAP shared folder I already deleted?
QNAP says to recreate the shared folder with Enter path manually pointing to the old path, then remove it again with Also delete the data selected. The shared folder and its contents are then deleted from the NAS.
What is Sys. Reserved on a QNAP NAS?
QNAP says it is space QTS needs for configuration information and volume metadata: about 70 GB per storage pool and 20 GB per static volume, 1% of each RAID group up to 150 GB, and 0.8% to 1.8% of volumes over 100 GB for EXT4 metadata.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.