NAS Codex › QNAP › QNAP Malware Remover alerts: MR1902, MR2102 and repeated warnings
QNAP Malware Remover alerts: MR1902, MR2102 and repeated warnings
Malware Remover is a built-in QNAP utility that scans the NAS and reports what it finds in notifications and event logs, each tagged with a Malware ID. Some of those alerts are real and some, by QNAP's own account, are false alarms. QNAP has FAQs for the IDs people see most often, MR1902 and MR2102, and for alerts that come back after every reboot.
Written against: Malware Remover on QTS (QNAP FAQs last modified 2022-06-24; QTS 5.0.x user guide). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
First note the exact message and Malware ID. If the NAS has no Internet access, connect it, open Malware Remover and run a scan so it can sync the latest definition file, then reboot and see whether the alert comes back. If the message says MR2102 "Removed the detected malware", check your files for a .7z extension.
MR1902 on a NAS without Internet access
QNAP says an MR1902 warning on a NAS that does not connect to the Internet is a false alarm. It is a known issue that happens when Malware Remover cannot sync its definition file. The FAQ lists Malware Remover 4.6.1.1 and says a fix was planned for the next version.
QNAP's workaround:
- Connect the NAS to the Internet.
- Open Malware Remover and click Scan. The latest definition file is synced during the scan.
- Wait for the scan to finish.
- Reboot the NAS and check whether the warning comes back.
If the NAS is not allowed to connect to the Internet, QNAP says to wait for the next Malware Remover release.
MR2102: two messages with different meanings
QNAP explains that MR2102 appears in two different messages:
- "[Malware Remover] Removed the detected malware. Malware:MR2102" means Qlocker was attacking the NAS and Malware Remover blocked it. QNAP says you need to check whether any files were encrypted as .7z files.
- "[Malware Remover] Removed vulnerable files or folders. Malware ID: MR2102" means Malware Remover moved some unused NAS application files to quarantine. QNAP says this does not affect any functions or indicate a potential risk, and that it was fixed in the latest version.
The same alert after every reboot
QNAP says repeated alerts after every reboot can happen when Malware Remover cannot update its definitions because the NAS is on an isolated network. The workaround is the same as for MR1902: connect the NAS to the Internet, run a scan (Malware Remover syncs the definition file before scanning), wait for it to finish, then reboot and check again.
Check the Malware Remover settings
QNAP's user guide says all Malware Remover settings are on by default. To check them, open Malware Remover and open its settings:
- Enable scheduled scan: scans all applications and files at the frequency and time you set. QNAP recommends running scans during off-peak hours.
- Instant scan after malware definition updates: runs a scan as soon as Malware Remover updates its definitions. QNAP says Malware Remover updates its malware signatures automatically.
- Send Malware Remover scan results to QNAP: sends scan results for analysis. QNAP lists the data it collects: NAS model, NAS IP address (deleted immediately after the results are analyzed), scan status, scan errors, detection date and time, and the Malware ID. Turning this off stops Malware Remover from sending any data to QNAP.
When to stop and get help
If the alert says malware was removed, QNAP's MR2102 FAQ says to check whether files were encrypted as .7z files, and links to a separate QNAP FAQ for a NAS that is encrypting files with 7z. The QNAP ransomware page on this site covers that case.
Questions
Is QNAP Malware Remover MR1902 a real infection?
QNAP says MR1902 on a NAS without Internet access is a false alarm caused by Malware Remover failing to sync its definition file. Connecting the NAS, running a scan and rebooting is QNAP's workaround.
What does MR2102 mean on QNAP?
QNAP says 'Removed the detected malware. Malware:MR2102' means Qlocker was blocked, so check for .7z files, while 'Removed vulnerable files or folders. Malware ID: MR2102' means unused app files were quarantined and is not a risk.
Why does Malware Remover alert after every reboot?
QNAP says this can happen when Malware Remover cannot update its definitions because the NAS is on an isolated network.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.