NAS Codex › QNAP › QNAP log: "Failed to connect to the internet" after checking NCSI
QNAP log: "Failed to connect to the internet" after checking NCSI
A QNAP NAS regularly tests whether it can reach the internet. When that test fails, QTS records a "Failed to connect to the internet" warning in its logs and in Notification Center. QNAP says the message means the connection is blocked, disconnected or unstable, and it documents both how to let the test through and how to turn the test off on a NAS that should stay offline.
Written against: QTS and QuTS hero (QNAP FAQs last modified 2023-05-17, 2023-09-07 and 2024-03-06; QTS 5.0.x manual: Configuring the System Default Gateway). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
If the NAS should reach the internet, make sure your firewall allows ncsi.qnap.com, which is the address QNAP says the test tries to reach. If the NAS should not reach the internet, turn the test off in Network & Virtual Switch > Network > Interfaces > System Default Gateway by selecting Disable the NCSI (Network Connectivity Status Indicator) service.
What the message means
QNAP says the NAS checks a Network Connectivity Status Indicator (NCSI) to decide whether it is connected to the internet. If the connection is blocked, disconnected or unstable, the check fails and a warning like this is logged:
[Network & Virtual Switch] Failed to connect to the internet. System default gateway "Adapter 1" and all adapters failed to connect to the internet after checking NCSI.
The same condition is behind the Failed to connect to the internet alert that Notification Center can record again and again. QNAP's explanation for that alert is simply that the internet connection is unstable or disconnected.
If the NAS should be online
Allow the test address
QNAP says the NCSI test tries to reach ncsi.qnap.com, so that address should be whitelisted on your firewall if you want the NAS to reach the internet.
Allow the addresses QNAP services use
For a firewall or proxy in front of the NAS, QNAP lists the addresses each internet feature needs:
- Firmware updates: update.qnap.com
- Helpdesk: service.qnap.com, help.qnap.com
- App Center: download.qnap.com, plus two myQNAPcloud API hosts, auth.api and core2.api, on the myQNAPcloud domain
- QNAP services: us1.qnap.com, eu1.qnap.com
- Antivirus (ClamAV): database.clamav.net, db.us.clamav.net, db.local.clamav.net
Check the system default gateway
The QTS manual describes the system default gateway as the network access point for the NAS: by default, all external network traffic goes through it. To check it:
- Go to Control Panel > Network & File Services > Network & Virtual Switch.
- Go to Network > Interfaces and click System Default Gateway.
- Choose Auto-select system default gateway to let QTS detect the adapter, virtual switch, PPPoE and VPN connections that can reach the internet and pick one, or choose Select the system default gateway to assign an adapter yourself.
- Click Apply.
When you assign the gateway manually you can also set a backup failover gateway, but only when more than one interface is connected. QNAP's tip: if you make a PPPoE or VPN connection the default gateway, set a stable physical connection as the failover default gateway. A network interface must be configured before you can assign it as the gateway.
If the NAS should stay offline
QNAP says you can stop the warning from being logged by turning off the NCSI check:
- Sign in to the NAS as an administrator.
- Open Network & Virtual Switch.
- Go to Network > Interfaces.
- Click System Default Gateway.
- Select Disable the NCSI (Network Connectivity Status Indicator) service.
- Click Apply.
The QTS manual notes that NCSI periodically tests the speed and status of the NAS's network connections, so turning it off stops those checks, not just the log entry.
When to stop and get help
Only disable NCSI on a NAS that is not meant to reach the internet. QNAP's fix for a NAS that should be online is to allow ncsi.qnap.com and the other QNAP addresses through your firewall.
Questions
Why does my QNAP say failed to connect to the internet?
QNAP says the NAS runs an NCSI check to test its internet connection. If the connection is blocked, disconnected or unstable, the check fails and QTS logs this warning.
What address does the QNAP NCSI test use?
QNAP says the NCSI test tries to reach ncsi.qnap.com, so whitelist it on your firewall if the NAS should reach the internet.
How do I stop the QNAP failed to connect to the internet alert?
In Network & Virtual Switch > Network > Interfaces > System Default Gateway, select 'Disable the NCSI (Network Connectivity Status Indicator) service' and click Apply. QNAP suggests this if the NAS is not meant to be online.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.
- QNAP FAQ: Why do I receive a "failed to connect to the internet after checking NCSI" error log?
- QNAP FAQ: Why does Notification Center frequently record a "Failed to connect to the internet" alert?
- QNAP FAQ: What firewall or proxy rules should I configure for WAN services?
- QTS 5.0.x manual: Configuring the System Default Gateway