NAS Codex › Synology › Can't connect to a Synology NAS via FTP or FTPS
Can't connect to a Synology NAS via FTP or FTPS
DSM can serve files over FTP, FTPS and SFTP from Control Panel > File Services > FTP. When an FTP client can't connect, connects and then stalls, or signs in but can't see a shared folder, Synology's FTP help points to a short list of settings: the service itself, the ports your router forwards, passive mode behind NAT, and the user's permissions.
Written against: DSM 7 (Synology KB: How can I access files on Synology NAS via FTP?; DSM 7 help: FTP / FTPS, FTP General). Last Updated: November 2026. Vendor menus and wording change between versions; if yours differ, follow the vendor page linked under Sources.
Before anything else: if the data on this NAS is not backed up somewhere else, copy it off first. Do not continue with any step on this page until you have.
Fast Answer
Confirm the FTP service is enabled in Control Panel > File Services > FTP, that your router forwards TCP 21 and the passive port range to the NAS, and that the user has read/write permission on the shared folder and the FTP application allowed on the Applications tab of Control Panel > User & Group.
1. Turn on the right FTP service
Sign in with an administrator account, go to Control Panel > File Services > FTP, and enable one of these, then click Apply:
- Enable FTP service (No encryption): faster and lighter on resources, but usernames, passwords and files are not encrypted.
- Enable FTP SSL/TLS encryption service (FTPS): encrypted, slower, uses more CPU.
- Enable SFTP service: encrypted, slower, uses more CPU.
Your client must use the matching protocol. Synology notes that in FileZilla you type sftp:// before the host to use SFTP; with no protocol given, FileZilla tries FTPS and then FTP.
2. Check the ports
- The FTP control port is 21 by default. You can change it to any port from 1 to 65535 except ports reserved for other services, such as 20, 22, 80, 443, 445, 5000, 5001 and 8080.
- If you leave the port out, FileZilla uses 21 for FTP/FTPS and 22 for SFTP.
- Port 20 carries data in active mode.
For connections from the internet, Synology says to check in Control Panel > External Access > Router Configuration that your router forwards TCP 21, TCP 20, and the passive data ports to the NAS. The KB article lists the passive range as 1025-65535, while the DSM help lists 55536-55567; Synology says the default passive range varies by model, so forward the range shown on your own NAS.
3. Passive mode behind a router
In the FTP settings, Port Range of Passive FTP lets you keep the default range or set your own between 1025 and 65535 (up to 128 ports; the number available varies by model).
Reporting External IP in PASV Mode makes the NAS report its external IP address to FTP clients, either auto-detected or entered by hand. Synology says it only works when the NAS is behind a NAT and the clients are on a different subnet. It is unnecessary in most cases, but if FTP clients fail to connect, Synology suggests enabling it and trying again.
4. Signed in but can't open a shared folder
Synology says to check that the user has the proper permissions:
- Go to Control Panel > User & Group, select the user and click Edit.
- On the Permissions tab, tick read/write for the shared folder.
- On the Applications tab, make sure Allow is ticked for FTP.
- Save.
If Change user root directories is on in Advanced Settings, users can only reach the folder set by their rule. Synology warns that a user or group without enough permission on that folder will be unable to sign in. Rules are applied in list order.
5. Other causes Synology lists
- The guest account cannot sign in via FTP. For access without a password, use Enable Anonymous FTP in Advanced Settings and give the Anonymous FTP/WebDAV system internal user permission on the shared folder.
- The FTP server disconnects idle users after the Timeout period.
- Limit connections per IP and Enable FTP bandwidth restriction can cap connections and speed. A server-wide Enable speed limit overrides individual user and group settings.
- File names display wrongly: Synology recommends UTF-8 (Auto), and the client's codepage must match the NAS. Choose Force if multilingual names still fail.
When to stop and get help
Plain FTP sends usernames, passwords and files without encryption. Synology offers FTPS and SFTP for encrypted transfers.
Questions
What ports does Synology FTP use?
Port 21 is the default control port and port 20 is used for active-mode data. Passive mode uses a range between 1025 and 65535; Synology says the default range varies by model.
Why can't a Synology user access a folder via FTP?
Synology says to check the user's read/write permission on the shared folder and that FTP is allowed on the Applications tab in Control Panel > User & Group.
What does Report external IP in PASV mode do on Synology?
It makes the NAS report its external IP to FTP clients. Synology says it only applies behind NAT with clients on a different subnet, and to try it if clients fail to connect.
Sources
Every fact on this page comes from the vendor documents below, opened on 2026-11-17.